Our Products
NextStone Slatestone
NextStone Country Ledgestone
Onyx: Slatestone Outside Corner: 5.17 lnft per box/ 4 pieces/ 2 right and 2 left
$108.51
Product Description:
The Onyx Slatestone Outside Corner is made to finish exterior wall edges where two faces meet. The interlocking design keeps things tight and tidy, and the corners can be screwed straight into place without much prep.
Each box includes four corners, two left, and two right, which helps keep your layout balanced. No paint, grout, or sealant needed. Once it’s up, it stays put.
The dark onyx shade works well with both modern and rustic siding. It’s a clean, crisp finish that ties the whole wall together.
Style:
Slatestone Outside Corner
Colour:
Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
11.5" x 7 1/4"
Thickness:
1 3/4"
Box Quantity:
4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners)
Coverage:
5.17 linear feet per box (approx. 5 sqft of flat area)
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats and corners:
1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Midnight Ash: Slatestone Flat Panel: 15 1/2" high, 43" wide, 1 3/4" thick: 4 pieces per box: 16.4 sqft coverage per box: sold by the full box
$286.83
Product Description
The Midnight Ash Slatestone Flat Panel gives your wall a stacked stone finish without weight or mess. It’s all clean lines and charcoal tones, with a textured surface that looks sharp in just about any setting.
Each box comes with four panels that cover around 16 square feet. They’re lightweight, lock into place, and can be installed indoors or out. Just start with a metal starter strip and screw them into place. You don’t need any fancy tools or any extras.
These panels are the perfect choice if you want a reliable, good-looking finish that’s easy to work with and built to last.
Style:
Slatestone Flat Panel
Colour:
Midnight Ash
Accessory Colour:
Charcoal
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
16.4 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Brunswick Brown: Slatestone 30" Column Wrap: 30" tall, 1 3/4" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Brunswick Brown Slatestone 30” Column Wrap is designed to wrap around a boxed column and give it a dry-stacked stone finish. It comes in four interlocking pieces that fit snugly together using a groove system, which keeps everything aligned and secure.
Each wrap stands 30 inches tall, with outer dimensions of 16” x 16” and inner dimensions just under 14”. The panels are 1¾ inches thick. This wrap must be installed around a solid box as it's not made to stand alone. Column caps are sold separately.
The Brunswick Brown colour has a rich, earthy tone that works well with wood, stone, and neutral siding.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Slatestone 30" Column Wrap
Colour:
Brunswick Brown
Accessory Colour:
Brown
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Rundle Ridge: Slatestone 41" Post Cover: 41" tall, 1 3/4" thick: 8" X 8" outside dimensions: one 2 piece post cover per box
$171.58
Product Description:
The Rundle Ridge Slatestone 41” Post Cover is a great way to give a plain post a clean, finished look. It works well on basement or deck posts and brings that stacked stone texture without the weight of real stone.
Each box includes two interlocking pieces that fit around a 4” or 6” wood post. You'll need a converter kit if you’re using it on a 4” post. Installation is simple with adhesive or screws, and will withstand all seasons.
The gray tones in Rundle Ridge match easily with other trim and panel styles.
Style:
Slatestone 41" Post Cover
Colour:
Rundle Ridge
Accessory Colour:
Gray
Texture:
Dry stacked stone look
Height:
41"
Width:
Outside dimensions: 8" x 8", Inside dimensions: 5 1/2" x 5 1/2"
Thickness:
1 3/4"
Box Quantity:
2 pieces
Coverage:
41" high (for 4 or 6 inch wood post)
Installation:
To cover a 4 or 6-inch wood post. Instructions are available in each box. Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Andean Onyx: Country Ledgestone Outside Corner: 5.17 lnft per box/ 4 pieces/ 2 right and 2 left
$118.85
Product Description:
The Andean Onyx County Ledgestone Outside Corner is made to finish wall edges neatly and match your flat panel installation. Each box includes four corner pieces, with two rights and two lefts, giving you just over five linear feet of coverage.
These corners fit together using NextStone’s interlocking system. Once your surface is prepped, installing these is easy as you don’t need any mortar and there’s no mess. All you need is screws and a starter kit.
The onyx colour works well with both light and dark walls. It’s a clean look that carries across the whole project.
Style:
Country Ledgestone Outside Corner
Colour:
Andean Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
8 1/4" x 5 1/2"
Thickness:
1 1/2"
Box Quantity:
4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners)
Coverage:
5.17 linear feet per box (approx. 5 sqft of flat area)
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats and corners:
1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Appalachian Gray: Country Ledgestone Flat Panel: 15 1/2" high, 43 1/2" wide, 1 1/2" thick: 4 pieces per box: 16.96 sqft coverage per box: sold by the full box
$296.63
Product Description:
The Appalachian Gray Country Ledgestone Flat Panel gives you the look of natural stone without the mess or weight. Its dry-stacked style and soft gray colour work well indoors or out, adding a clean, rustic finish to any wall.
Panels lock together starting with a metal starter strip, and you can screw them straight into your wall surface. There’s no mortar involved, and no need for special tools either.
Each box covers just under 17 square feet and includes four lightweight panels. It’s a simple way to get the look of real stone without any of the mess.
Style:
Country Ledgestone Flat Panel
Colour:
Appalachian Gray
Accessory Colour:
Gray
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43 1/2"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
16.96 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Teton Buff: Country Ledgestone 30" Column Wrap: 30" tall, 1 1/2" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Teton Buff Country Ledgestone 30” Column Wrap is designed to give boxed columns a realistic stone finish without the weight or mess of real masonry. Each wrap includes four locking pieces that fit together easily using the built-in groove system.
This wrap stands 30 inches tall and measures 16” x 16” on the outside, with an inner opening of just under 14”/. It’s 1½ inches thick and is designed to be attached to a structural box. Column caps are sold separately.
The Teton Buff colour has a warm, natural look that pairs well with wood trim, stucco, or siding. An excellent choice for all different exterior styles.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Country Ledgestone 30" Column Wrap
Colour:
Teton Buff
Accessory Colour:
Buff
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Himalayan Brown: Country Ledgestone 47" Post Cover: 47" tall, 1 3/4" thick: 8" X 8" outside dimensions: one 2 piece post cover per box
$176.87
Product Description:
The Himalayan Brown Country Ledgestone 47” Post Cover gives wood posts a clean, stone-look finish. Each stands 47 inches tall and fits over 4 or 6-inch posts with an 8” x 8” outer profile. The box includes two interlocking panels that form a full wrap.
The dry-stacked texture adds depth to basements, porches, and deck columns. You can glue or screw the panels together. You don’t need to paint or caulk it; no extra prep is required.
The brown tone works well with neutral siding and trim. For use with vertical services only.
Style:
Country Ledgestone 47" Post Cover
Colour:
Himalayan Brown
Accessory Colour:
Brown
Texture:
Dry stacked stone look
Height:
47"
Width:
Outside dimensions: 8" x 8", Inside dimensions: 6" x 6"
Thickness:
1 1/2"
Box Quantity:
2 pieces
Coverage:
47" high (for 4 or 6 inch wood post)
Installation:
To cover a 4 or 6-inch wood post. Instructions are available in each box. Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Imagine your home with elevated curb appeal
Picture your abode, clad in the majesty of faux rock wall panels so realistic, your neighbors do a double-take - yet here’s the twist: installation’s a breeze with our snazzy 45-degree tongue-and-groove magic. No sweat, no hassle! And the best part? Our imitation stone panels, crafted from durable polyurethane and reinforced with recycled PVC, stand strong against fading and wear. With faux rock siding built for longevity, your home gets the everlasting embrace of NextStone durability. Now that’s what we call ‘rock’ solid performance!
Imitation Stone Panels
Onyx: Slatestone Flat Panel: 15 1/2" high, 43" wide, 1 3/4" thick: 4 pieces per box: 16.4 sqft coverage per box: sold by the full box
$286.83
Product Description
The Onyx Slatestone Flat Panel gives your wall the look of real stacked stone without any of the weight or mess. The panels interlock and fasten directly to the wall using a starter strip which you can purchase separately.
All you need to do is line them up and fasten them with screws. They then sit tightly on the wall, making it easy to keep things straight as you build. No special tools are needed and there is no mortar or messy prep.
The onyx colour brings out a dark, textured look that really stands out against walls or trim.
Style:
Slatestone Flat Panel
Colour:
Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
16.4 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Rundle Ridge: Slatestone Flat Panel: 15 1/2" high, 43" wide, 1 3/4" thick: 4 pieces per box: 16.4 sqft coverage per box: sold by the full box
$286.83
Product Description
The Rundle Ridge Slatestone Flat Panel gives your wall a stacked stone look without the weight or mess. Each box includes four panels, covering 16.4 square feet.
They fit together cleanly and screw straight into place with a metal starter strip. No mortar needed. You can use them indoors or out, and they’re a good match with the Rundle Ridge corners and accessories.
The colour has a nice balance, as it’s just dark enough to stand out, without overpowering the space. It’s a simple way to get a sharp, stone-style finish with less work.
Style:
Slatestone Flat Panel
Colour:
Rundle Ridge
Accessory Colour:
Gray
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
16.4 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Himalayan Brown: Country Ledgestone Flat Panel: 15 1/2" high, 43 1/2" wide, 1 1/2" thick: 4 pieces per box: 16.96 sqft coverage per box: sold by the full box
$296.63
Product Description:
The Himalayan Brown Country Ledgestone Flat Panel gives your project a warm, natural look with a dry-stacked stone texture. Each panel measures just over three and a half feet wide and comes in a box of four, covering nearly 17 square feet.
These panels are designed to fit together neatly using a metal starter strip, so no mortar or mess is involved. Once your surface is prepped, it’s just a matter of lining them up and fastening them into place.
They're lightweight, easy to handle, and ideal for vertical wall surfaces. If you're using them on the outside of your home, you can pair them with matching corners and ledgers.
Style:
Country Ledgestone Flat Panel
Colour:
Himalayan Brown
Accessory Colour:
Brown
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43 1/2"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
16.96 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Teton Buff: Country Ledgestone Flat Panel: 15 1/2" high, 43 1/2" wide, 1 1/2" thick: 4 pieces per box: 16.96 sqft coverage per box: sold by the full box
$296.63
Product Description:
The Teton Buff Country Ledgestone Flat Panels are a simple way to get that stacked stone look without the weight or mess. Each panel is just over three and a half feet wide, and you get four per box, covering nearly 17 square feet.
These panels lock into each other cleanly and start with a metal strip along the base of your wall. No mortar needed. Just grab some screws and your basic tools, and you’re set.
They’re made for vertical surfaces only and are best suited for full wall coverage or accents. You’ll get a great result with less effort than traditional stonework.
Style:
Country Ledgestone Flat Panel
Colour:
Teton Buff
Accessory Colour:
Buff
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43 1/2"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
16.96 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Get Inspired!
Visit our showroom to explore stunning transformations with faux rock wall panels, imitation stone panels, and faux rock siding. From elegant stone finishes to modern designs, see how NextStone can elevate your space with style and durability!
Post Cover Caps
Onyx: Slatestone 41" Post Cover: 41" tall, 1 3/4" thick: 8" X 8" outside dimensions: one 2 piece post cover per box
$171.58
Product Description:
The Onyx Slatestone 41” Post Cover gives you a fast and clean way to add a stone look to your desk or basement posts. It comes in two pieces that fit together around a wood post and stay secure with adhesive and screws.
This style works with 4” or 6” posts. If you’re wrapping a 4” post, you’ll need a converter kit. The dry-stacked finish gives it a solid, realistic texture, and the dark onyx shade contrasts with lighter panels.
Each box includes one full wrap. Post caps are sold separately to complete the look.
Style:
Slatestone 41" Post Cover
Colour:
Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
41"
Width:
Outside dimensions: 8" x 8", Inside dimensions: 5 1/2" x 5 1/2"
Thickness:
1 3/4"
Box Quantity:
2 pieces
Coverage:
41" high (for 4 or 6 inch wood post)
Installation:
To cover a 4 or 6-inch wood post. Instructions are available in each box. Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Charcoal: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
The Charcoal 10” Post Cover Cap is made to finish your post covers neatly. It’s shaped with a slight peak and a rough stone texture, designed to fit snugly on top of a 47” Country Ledgestone or 41" Slatestone Post Cover. The charcoal colour gives it a clean, modern look.
It measures 10” x 10” on the outside and fits over posts with an 8” x 8” top. The edge stands 1.5 inches tall and rises 3 inches at the peak. You get one cap per box.
To install it, just apply polyurethane adhesive and press it into place. No extra tools or trimming needed.
Style:
10" Post Cover Cap
Colour:
Charcoal
Texture:
Rough texture
Height:
3" at peak
Width:
10" x 10" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Buff: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
The Buff 10" Post Cover Cap is built to finish the top of your NextStone post covers with a clean, simple look. It has a rough stone texture and a soft buff colour that works well in most settings.
Each cap has a 10" x 10" outer dimension and fits nicely over posts with an 8" x 8" top. The edge is 1.5 inches high, rising to 3 inches at the peak. It’s made to match the 47" Country Ledgestone or 41" Slatestone Post Covers.
Installation is quick and easy. Just apply polyurethane adhesive and press it into place. One piece per box.
Style:
10" Post Cover Cap
Colour:
Buff
Texture:
Rough texture
Height:
3" at peak
Width:
10" x 10" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Brown: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
This 10” Post Cover Cap in brown is made to finish your NextStone post wraps with a clean, peaked top. The rough stone texture adds a natural touch, and the brown colour works well with various panels.
It measures 10" x 10" on the outside and fits over an 8” x 8” post. The edge is 1.5 inches high and rises to 3 inches at the peak. Designed to work with the 47-inch Country Ledgestone or 41-inch Slatestone Post Covers.
Just apply polyurethane adhesive and press it in place. It's quick to install and sold as a single piece per box.
Style:
10" Post Cover Cap
Colour:
Brown
Texture:
Rough texture
Height:
3" at peak
Width:
10" x 10" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Your Home Transformed with Faux Rock Siding
Turn your home into a masterpiece with faux rock wall panels and imitation stone siding. This isn’t just another exterior upgrade—it’s a work of art. Get the timeless look of stone with modern durability, creating the ultimate curb appeal without the hassle. Easy to install, built to last, and absolutely stunning.
Column Wraps
Andean Onyx: Country Ledgestone 30" Column Wrap: 30" tall, 1 1/2" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Andean Onyx Country Ledgestone 30” Column Wrap gives your columns a bold, stone-finished upgrade without heavy lifting. It’s designed to wrap around an existing boxed post using four pieces that click into place with the patented groove system. This means you don’t need extra tools or any adhesives.
This style works exceptionally well with dark trims, modern builds, or homes with black or grey accents. The stacked stone texture has a natural depth that looks good up close or from the street.
Please note that this is not a standalone column. You’ll need a structural box underneath and may want to add a cap to finish the look.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Country Ledgestone 30" Column Wrap
Colour:
Andean Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Teton Buff: Country Ledgestone 30" Column Wrap: 30" tall, 1 1/2" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Teton Buff Country Ledgestone 30” Column Wrap is designed to give boxed columns a realistic stone finish without the weight or mess of real masonry. Each wrap includes four locking pieces that fit together easily using the built-in groove system.
This wrap stands 30 inches tall and measures 16” x 16” on the outside, with an inner opening of just under 14”/. It’s 1½ inches thick and is designed to be attached to a structural box. Column caps are sold separately.
The Teton Buff colour has a warm, natural look that pairs well with wood trim, stucco, or siding. An excellent choice for all different exterior styles.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Country Ledgestone 30" Column Wrap
Colour:
Teton Buff
Accessory Colour:
Buff
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Rundle Ridge: Slatestone 30" Column Wrap: 30" tall, 1 3/4" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Rundle Ridge Slatestone 30" Column Wrap is designed to cover boxed columns with a clean, dry-stacked stone finish. Each set includes four interlocking pieces that fit together using a patented groove system for a snug, reliable fit.
The wrap stands 30 inches tall and finished at 16 inches by 16 inches on the outside. The inside dimensions are just under 14 inches, and the thickness is 1 ¾ inches. It’s made for vertical surfaces and is not suitable as a stand-alone structure.
The Rundle Ridge colour has cool grey tones that work well with various styles.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Slatestone 30" Column Wrap
Colour:
Rundle Ridge
Accessory Colour:
Gray
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Onyx: Slatestone 30" Column Wrap: 30" tall, 1 3/4" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Onyx Slatestone 30” Column Wrap gives existing posts a finished stone look without any hassle of real masonry. Each set includes four interlocking pieces that fit together using a patented groove system, which creates a solid wrap around your column.
It’s designed to go over a box or post, not to stand on its own. The finished dimensions are 16” x 16” on the outside and just under 14” inside. Each wrap covers 30 inches in height and has a 1¾” thick profile.
Works with matching 18” caps, which are sold separately. Columns must be in place before wrapping.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Slatestone 30" Column Wrap
Colour:
Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
What Makes Us Different?
Whether you're boosting resale value, enhancing curb appeal, or adding a stylish touch indoors, NextStone offers faux rock siding and imitation stone panels that fit your vision and budget. Get the natural stone look without the heavy cost or hassle!
Our Blog
Subscribe to our Newsletter!
Be the first to know about new collections and exclusive offers.
