Catalogue
Our Products
10" Post Cover Cap
18" Column Cap
30" Column Wrap
Converter Kit
NextStone Wall Panel
NextStone Wall Panel Outside Corner
Post Cover
All products
Column Wrap Cap 18"
Column Wraps
Country Ledgestone 47" Post Cover
Country Ledgestone Column Wraps
NextStone Accessories
NextStone Country Ledgestone
NextStone Slatestone
Post Cover Caps 10"
Post Cover Converter Kits
Sandstone Flush Mount Outside Corner
Sandstone Ledger / Sill
Sandstone Ledger / Sill Inside Corner
Sandstone Ledger / Sill Outside Corner
Sandstone Window and Door Trim
Slatestone 41" Post Cover
Slatestone Column Wrap
Stone Panels
Onyx: Slatestone Outside Corner: 5.17 lnft per box/ 4 pieces/ 2 right and 2 left
$108.51
Product Description:
The Onyx Slatestone Outside Corner is made to finish exterior wall edges where two faces meet. The interlocking design keeps things tight and tidy, and the corners can be screwed straight into place without much prep.
Each box includes four corners, two left, and two right, which helps keep your layout balanced. No paint, grout, or sealant needed. Once it’s up, it stays put.
The dark onyx shade works well with both modern and rustic siding. It’s a clean, crisp finish that ties the whole wall together.
Style:
Slatestone Outside Corner
Colour:
Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
11.5" x 7 1/4"
Thickness:
1 3/4"
Box Quantity:
4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners)
Coverage:
5.17 linear feet per box (approx. 5 sqft of flat area)
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats and corners:
1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Midnight Ash: Slatestone Flat Panel: 15 1/2" high, 43" wide, 1 3/4" thick: 4 pieces per box: 16.4 sqft coverage per box: sold by the full box
$286.83
Product Description
The Midnight Ash Slatestone Flat Panel gives your wall a stacked stone finish without weight or mess. It’s all clean lines and charcoal tones, with a textured surface that looks sharp in just about any setting.
Each box comes with four panels that cover around 16 square feet. They’re lightweight, lock into place, and can be installed indoors or out. Just start with a metal starter strip and screw them into place. You don’t need any fancy tools or any extras.
These panels are the perfect choice if you want a reliable, good-looking finish that’s easy to work with and built to last.
Style:
Slatestone Flat Panel
Colour:
Midnight Ash
Accessory Colour:
Charcoal
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
16.4 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Brunswick Brown: Slatestone 30" Column Wrap: 30" tall, 1 3/4" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Brunswick Brown Slatestone 30” Column Wrap is designed to wrap around a boxed column and give it a dry-stacked stone finish. It comes in four interlocking pieces that fit snugly together using a groove system, which keeps everything aligned and secure.
Each wrap stands 30 inches tall, with outer dimensions of 16” x 16” and inner dimensions just under 14”. The panels are 1¾ inches thick. This wrap must be installed around a solid box as it's not made to stand alone. Column caps are sold separately.
The Brunswick Brown colour has a rich, earthy tone that works well with wood, stone, and neutral siding.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Slatestone 30" Column Wrap
Colour:
Brunswick Brown
Accessory Colour:
Brown
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Rundle Ridge: Slatestone 41" Post Cover: 41" tall, 1 3/4" thick: 8" X 8" outside dimensions: one 2 piece post cover per box
$171.58
Product Description:
The Rundle Ridge Slatestone 41” Post Cover is a great way to give a plain post a clean, finished look. It works well on basement or deck posts and brings that stacked stone texture without the weight of real stone.
Each box includes two interlocking pieces that fit around a 4” or 6” wood post. You'll need a converter kit if you’re using it on a 4” post. Installation is simple with adhesive or screws, and will withstand all seasons.
The gray tones in Rundle Ridge match easily with other trim and panel styles.
Style:
Slatestone 41" Post Cover
Colour:
Rundle Ridge
Accessory Colour:
Gray
Texture:
Dry stacked stone look
Height:
41"
Width:
Outside dimensions: 8" x 8", Inside dimensions: 5 1/2" x 5 1/2"
Thickness:
1 3/4"
Box Quantity:
2 pieces
Coverage:
41" high (for 4 or 6 inch wood post)
Installation:
To cover a 4 or 6-inch wood post. Instructions are available in each box. Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Brunswick Brown: Slatestone Flat Panel: 15 1/2" high, 43" wide, 1 3/4" thick: 4 pieces per box: 16.4 sqft coverage per box: sold by the full box
$286.83
Product Description:
The Brunswick Brown Slatestone Flat Panel gives you the look of real stacked stone without the usual weight or mess. With warm brown tones and deep grout lines, it’s a solid choice for exterior walls, skirting, or outdoor accents.
Each panel locks into place using a built-in groove system, so once you’ve added the starter strip, installation moves quickly. There’s no need for mortar or paint, and the finish looks neat from start to finish.
These panels are built to match with NextStone corners and other accessories, which helps everything line up well visually. And with 16.4 square feet of coverage in each box, it’s easy to plan out what you’ll need for the job.
Style:
Slatestone Flat Panel
Colour:
Brunswick Brown
Accessory Colour:
Brown
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
16.4 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Midnight Ash: Slatestone Outside Corner: 5.17 lnft per box/ 4 pieces/ 2 right and 2 left
$108.51
Product Description:
The Midnight Ash Slatestone Outside Corner is made to finish off exterior edges with a stacked stone look that holds up well in any setting. You’ll get four corner pieces in the box, two left, two right, giving you just over five linear feet of coverage.
These corners work with the matching flat panels and hold tight with screws. The interlock design hides fasteners, so the finished edge stays clean.
This colour has a deep charcoal base with enough contrast to stand out, but not too much to clash. A great choice if you want something modern that still feels natural.
Style:
Slatestone Outside Corner
Colour:
Midnight Ash
Accessory Colour:
Charcoal
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
11.5" x 7 1/4"
Thickness:
1 3/4"
Box Quantity:
4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners)
Coverage:
5.17 linear feet per box (approx. 5 sqft of flat area)
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats and corners:
1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Rundle Ridge: Slatestone Flat Panel: 15 1/2" high, 43" wide, 1 3/4" thick: 4 pieces per box: 16.4 sqft coverage per box: sold by the full box
$286.83
Product Description
The Rundle Ridge Slatestone Flat Panel gives your wall a stacked stone look without the weight or mess. Each box includes four panels, covering 16.4 square feet.
They fit together cleanly and screw straight into place with a metal starter strip. No mortar needed. You can use them indoors or out, and they’re a good match with the Rundle Ridge corners and accessories.
The colour has a nice balance, as it’s just dark enough to stand out, without overpowering the space. It’s a simple way to get a sharp, stone-style finish with less work.
Style:
Slatestone Flat Panel
Colour:
Rundle Ridge
Accessory Colour:
Gray
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
16.4 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Rundle Ridge: Slatestone Outside Corner: 5.17 lnft per box/ 4 pieces/ 2 right and 2 left
$108.51
Product Description:
These Rundle Ridge Slatestone outside corners help you finish the job without fuss. Each box gives you four pieces, two right and two left, so you can wrap corners cleanly and keep everything lined up.
They fit together with a hidden screw design that locks in place, no extra trimming or guesswork needed. The dry stack look adds detail without bulk, and the colour pairs well with warm and cool tones.
Use them on any vertical surface, inside or out. Just grab a screwdriver and follow the included instructions. Matching panels and accessories are available if you're doing a full wall.
Style:
Slatestone Outside Corner
Colour:
Rundle Ridge
Accessory Colour:
Gray
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
11.5" x 7 1/4"
Thickness:
1 3/4"
Box Quantity:
4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners)
Coverage:
5.17 linear feet per box (approx. 5 sqft of flat area)
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats and corners:
1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Brunswick Brown: Slatestone Outside Corner: 5.17 lnft per box/ 4 pieces/ 2 right and 2 left
$108.51
Product Description:
The Brunswick Brown Slatestone Outside Corner gives you a finished edge that matches the warmth and texture of your flat panels. With its dry-stacked stone look and earthy brown tones, it blends right in and ties everything together.
Each box includes two left and two right corner pieces, moulded with the same detail as the panels and numbered for an easy install. They interlock cleanly and hide the screws, so once it’s up, it all just looks like stone.
If your project has exposed edges or 90-degree turns, these are what keep it looking neat and built-in.
Style:
Slatestone Outside Corner
Colour:
Brunswick Brown
Accessory Colour:
Brown
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
11.5" x 7 1/4"
Thickness:
1 3/4"
Box Quantity:
4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners)
Coverage:
5.17 linear feet per box (approx. 5 sqft of flat area)
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats and corners:
1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Onyx: Slatestone Flat Panel: 15 1/2" high, 43" wide, 1 3/4" thick: 4 pieces per box: 16.4 sqft coverage per box: sold by the full box
$286.83
Product Description
The Onyx Slatestone Flat Panel gives your wall the look of real stacked stone without any of the weight or mess. The panels interlock and fasten directly to the wall using a starter strip which you can purchase separately.
All you need to do is line them up and fasten them with screws. They then sit tightly on the wall, making it easy to keep things straight as you build. No special tools are needed and there is no mortar or messy prep.
The onyx colour brings out a dark, textured look that really stands out against walls or trim.
Style:
Slatestone Flat Panel
Colour:
Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
16.4 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Brunswick Brown: Slatestone 41" Post Cover: 41" tall, 1 3/4" thick: 8" X 8" outside dimensions: one 2 piece post cover per box
$171.58
Product Description:
The Brunswick Brown Slatestone 41” Post Cover is a quick and tidy way to upgrade wood posts with a stone finish. The dry-stacked texture gives a natural look, and the two-piece design wraps easily around 4” or 6” posts. Each box includes both panels to complete one post.
You’ll need a converter kit for 4” posts, and that's sold separately. Caps are available to match. Use glue or screws depending on your setup. The brown tone adds a classic finish that suits modern and traditional builds.
It's an excellent choice for posts that need a better look.
Style:
Slatestone 41" Post Cover
Colour:
Brunswick Brown
Accessory Colour:
Brown
Texture:
Dry stacked stone look
Height:
41"
Width:
Outside dimensions: 8" x 8", Inside dimensions: 5 1/2" x 5 1/2"
Thickness:
1 3/4"
Box Quantity:
2 pieces
Coverage:
41" high (for 4 or 6 inch wood post)
Installation:
To cover a 4 or 6-inch wood post. Instructions are available in each box. Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Midnight Ash: Slatestone 41" Post Cover: 41" tall, 1 3/4" thick: 8" X 8" outside dimensions: one 2 piece post cover per box
$171.58
Product Description:
The Midnight Ash Slatestone 41” Post Cover gives wood posts a solid stone look without all the hard work. It's a simple two-piece design that clicks together around a 4” or 6” post. A converter kit is needed for 4” posts, which is sold separately.
You can use screws or adhesive to fix the pieces in place. The stacked stone fixture texture adds a clean finish that works well with most siding and trim styles.
The colour sits at the darker end of the range, giving a bold, modern look.
Style:
Slatestone 41" Post Cover
Colour:
Midnight Ash
Accessory Colour:
Charcoal
Texture:
Dry stacked stone look
Height:
41"
Width:
Outside dimensions: 8" x 8", Inside dimensions: 5 1/2" x 5 1/2"
Thickness:
1 3/4"
Box Quantity:
2 pieces
Coverage:
41" high (for 4 or 6 inch wood post)
Installation:
To cover a 4 or 6-inch wood post. Instructions are available in each box. Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Onyx: Slatestone 41" Post Cover: 41" tall, 1 3/4" thick: 8" X 8" outside dimensions: one 2 piece post cover per box
$171.58
Product Description:
The Onyx Slatestone 41” Post Cover gives you a fast and clean way to add a stone look to your desk or basement posts. It comes in two pieces that fit together around a wood post and stay secure with adhesive and screws.
This style works with 4” or 6” posts. If you’re wrapping a 4” post, you’ll need a converter kit. The dry-stacked finish gives it a solid, realistic texture, and the dark onyx shade contrasts with lighter panels.
Each box includes one full wrap. Post caps are sold separately to complete the look.
Style:
Slatestone 41" Post Cover
Colour:
Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
41"
Width:
Outside dimensions: 8" x 8", Inside dimensions: 5 1/2" x 5 1/2"
Thickness:
1 3/4"
Box Quantity:
2 pieces
Coverage:
41" high (for 4 or 6 inch wood post)
Installation:
To cover a 4 or 6-inch wood post. Instructions are available in each box. Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Midnight Ash: Slatestone 30" Column Wrap: 30" tall, 1 3/4" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Midnight Ash Slatestone 30” Column Wrap is made to fit around boxed columns, giving them a clean, stacked stone finish. Each wrap comes as four interlocking pieces that snap together using a patented groove system. Once it's on, it stays put.
The finished column measures 16 inches by 16 inches on the outside and stands 30 inches tall. Inside dimensions are just under 14 inches. Each piece is 1 ¾ inches thick. It’s not a stand-alone product, so you’ll need a box frame underneath.
The Midnight Ash colour adds contrast and works well with charcoal or neutral tones.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Slatestone 30" Column Wrap
Colour:
Midnight Ash
Accessory Colour:
Charcoal
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Rundle Ridge: Slatestone 30" Column Wrap: 30" tall, 1 3/4" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Rundle Ridge Slatestone 30" Column Wrap is designed to cover boxed columns with a clean, dry-stacked stone finish. Each set includes four interlocking pieces that fit together using a patented groove system for a snug, reliable fit.
The wrap stands 30 inches tall and finished at 16 inches by 16 inches on the outside. The inside dimensions are just under 14 inches, and the thickness is 1 ¾ inches. It’s made for vertical surfaces and is not suitable as a stand-alone structure.
The Rundle Ridge colour has cool grey tones that work well with various styles.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Slatestone 30" Column Wrap
Colour:
Rundle Ridge
Accessory Colour:
Gray
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Onyx: Slatestone 30" Column Wrap: 30" tall, 1 3/4" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Onyx Slatestone 30” Column Wrap gives existing posts a finished stone look without any hassle of real masonry. Each set includes four interlocking pieces that fit together using a patented groove system, which creates a solid wrap around your column.
It’s designed to go over a box or post, not to stand on its own. The finished dimensions are 16” x 16” on the outside and just under 14” inside. Each wrap covers 30 inches in height and has a 1¾” thick profile.
Works with matching 18” caps, which are sold separately. Columns must be in place before wrapping.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Slatestone 30" Column Wrap
Colour:
Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 3/4"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Country Ledgestone Post Cover Converter Kit: for use when installing Country Ledgestone Post Covers onto a 4" X 4" post: 1 set per box
$32.99
Product Description:
The Country Ledgestone Post Cover Converter Kit lets you fit a 4” x 4” post with NextStones Country Ledgestone Post Covers. Each kit contains four polyurethane rings, one for the top, one for the bottom, and two for the middle.
The rings are screwed directly into the wood post and build it out to a 6” x 6” size. If your post doesn’t allow the ring to slide on, you can cut it in half or diagonally.
It's a simple solution that makes your post cover installation easier. This kit is for vertical surfaces only.
Style:
Country Ledgestone Post Cover Converter Kit
Colour:
Neutral
Texture:
Smooth
Width:
Outside dimensions: 6" x 6", Inside dimensions: 4" x 4"
Thickness:
1 1/2"
Box Quantity:
4 pieces, 1 top, 1 bottom, 2 middle supports
Installation:
NextStone Post Cover Converter Kit Polyurethane rings are made to extend a TRUE 4" x 4" post to 6" x 6" for NextStone Post Covers. Screwed into the bottom, top and in the middle of the wood post. Converter kits can be but diagonally or in half to accommodate posts that do not allow kits to slide over. Post Covers and Caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Slatestone Post Cover Converter Kit: for use when installing Slatestone Post Covers onto a 4" X 4" post: 1 set per box
$23.75
Product Description:
The Slatestone Post Cover Convert Kit is designed to fit 4” x 4” wood posts, allowing NextStone Slatestone Post Covers to be installed securely. The kit extends the post to 6” x 6” using lightweight polyurethane rings.
In each box, there are four pieces. One top, one bottom, and two middle supports. The rings screw directly into the post and can be cut in half diagonally if needed. This gives you flexibility for posts where a full ring won’t slide over.
This kit is for vertical use only. Post covers and caps are sold separately.
Style:
Slatestone Post Cover Converter Kit
Colour:
Neutral
Texture:
Smooth
Width:
Outside dimensions: 6" x 6", Inside dimensions: 4" x 4"
Thickness:
1 1/2"
Box Quantity:
4 pieces, 1 top, 1 bottom, 2 middle supports
Installation:
NextStone Post Cover Converter Kit Polyurethane rings are made to extend a TRUE 4" x 4" post to 6" x 6" for NextStone Post Covers. Screwed into the bottom, top and in the middle of the wood post. Converter kits can be but diagonally or in half to accommodate posts that do not allow kits to slide over. Post Covers and Caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Onyx: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
The Onyx 10" Post Cover Cap adds a clean finish to your NextStone post wraps. It has a rough texture with a peaked top and a deep charcoal colour that works well with both light and dark tones.
Each cap measures 10.5” x 10.5” on the outside and fits perfectly over an 8” x 8” post. The edge height is 1.5 inches, rising to 3 inches at the peak. This cap is made to fit over the 47” Country Ledgestone or 41” Slatestone Post Covers.
Comes with one per box. Installation is simple using polyurethane adhesive. Just line it up and press it down.
Style:
10" Post Cover Cap
Colour:
Onyx
Texture:
Rough texture
Height:
3" at peak
Width:
10 1/2" x 10 1/2" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Gray: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
The Gray 10” Post Cover Cap sits on your NextStone post wraps. It has a rough texture and a peaked shape that gives each post a finished look. The colour is easy to match with most styles.
Each cap has an outer size of 10” x 10” and fits neatly over an 8” x 8” post. The edge height is 1.5 inches, rising to 3 inches at the peak. It’s made to fit over the 47” Country Ledgestone or 41” Slatestone Post Covers.
There is one cap per box. Attach it with polyurethane adhesive and press it into place.
Style:
10" Post Cover Cap
Colour:
Gray
Texture:
Rough texture
Height:
3" at peak
Width:
10" x 10" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Brown: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
This 10” Post Cover Cap in brown is made to finish your NextStone post wraps with a clean, peaked top. The rough stone texture adds a natural touch, and the brown colour works well with various panels.
It measures 10" x 10" on the outside and fits over an 8” x 8” post. The edge is 1.5 inches high and rises to 3 inches at the peak. Designed to work with the 47-inch Country Ledgestone or 41-inch Slatestone Post Covers.
Just apply polyurethane adhesive and press it in place. It's quick to install and sold as a single piece per box.
Style:
10" Post Cover Cap
Colour:
Brown
Texture:
Rough texture
Height:
3" at peak
Width:
10" x 10" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Buff: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
The Buff 10" Post Cover Cap is built to finish the top of your NextStone post covers with a clean, simple look. It has a rough stone texture and a soft buff colour that works well in most settings.
Each cap has a 10" x 10" outer dimension and fits nicely over posts with an 8" x 8" top. The edge is 1.5 inches high, rising to 3 inches at the peak. It’s made to match the 47" Country Ledgestone or 41" Slatestone Post Covers.
Installation is quick and easy. Just apply polyurethane adhesive and press it into place. One piece per box.
Style:
10" Post Cover Cap
Colour:
Buff
Texture:
Rough texture
Height:
3" at peak
Width:
10" x 10" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Charcoal: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
The Charcoal 10” Post Cover Cap is made to finish your post covers neatly. It’s shaped with a slight peak and a rough stone texture, designed to fit snugly on top of a 47” Country Ledgestone or 41" Slatestone Post Cover. The charcoal colour gives it a clean, modern look.
It measures 10” x 10” on the outside and fits over posts with an 8” x 8” top. The edge stands 1.5 inches tall and rises 3 inches at the peak. You get one cap per box.
To install it, just apply polyurethane adhesive and press it into place. No extra tools or trimming needed.
Style:
10" Post Cover Cap
Colour:
Charcoal
Texture:
Rough texture
Height:
3" at peak
Width:
10" x 10" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Onyx: 18" Column Cover Cap: 2" high edge, 5" at peak, 18" X 18" outside dimension: 1 piece per box
$58.07
Product Description:
The Onyx 18" Column Cover Cap is a clean way to finish your column wraps. It has a rough stone texture and a peaked top, designed to sit firmly on top of a 30" Country Ledgestone or Slatestone Column Wrap. The dark onyx colour brings a solid, bold finish to any setup.
It fits columns with a 16" x 16" top and measures 18" x 18" on the outside. One cap per box.
Installing it is straightforward. Just apply polyurethane adhesive to press it into place. Column wraps are sold separately.
Style:
18" Column Wrap Cap
Colour:
Onyx
Texture:
Rough texture
Height:
5" at peak
Width:
18" x 18" outside dimension, 16" x 16" inside dimension
Thickness:
2" edge, 5" at peak
Box Quantity:
1 piece
Installation:
NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap. Column Wraps are sold separately.
Application:
To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Gray: 18" Column Cover Cap: 2" high edge, 5" at peak, 18" X 18" outside dimension: 1 piece per box
$58.07
Product Description:
The Gray 18 inch Column Cover Cap is made to top off your NextStone Column Wrap with a finished look. It has a natural stone texture and a peaked profile, which gives columns a solid and professional appearance. The grey shade works well in modern and traditional settings.
Each cap measures 18 inches across on the outside and 16 inches inside, fitting neatly over 30 inch Country Ledgestone or Slatestone Column Wraps.
Installing them is quick and easy with polyurethane adhesive, with no cutting or painting. Once set, it holds in place and won’t move.
Style:
18" Column Wrap Cap
Colour:
Gray
Texture:
Rough texture
Height:
5" at peak
Width:
18" x 18" outside dimension, 16" x 16" inside dimension
Thickness:
2" edge, 5" at peak
Box Quantity:
1 piece
Installation:
NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap. Column Wraps are sold separately.
Application:
To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Brown: 18" Column Cover Cap: 2" high edge, 5" at peak, 18" X 18" outside dimension: 1 piece per box
$58.07
Product Description:
The Brown 18 inch Column Cover Cap finishes off your NextStone Column Wrap with a clean finish. It has a rough texture and a peaked top that gives it a natural look, despite it being plastic. The brown tone adds a warm, natural feel that works with different colours.
Each cap is 18 inches wide outside, with a 16-inch opening underneath to fit over a 30 inch column wrap. The edge stands at 2 inches high and reaches 5 inches at the peak.
To fit these, use polyurethane adhesive. No paint or extra steps are needed, and once it's in place, it will stay in place.
Style:
18" Column Wrap Cap
Colour:
Brown
Texture:
Rough texture
Height:
5" at peak
Width:
18" x 18" outside dimension, 16" x 16" inside dimension
Thickness:
2" edge, 5" at peak
Box Quantity:
1 piece
Installation:
NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap. Column Wraps are sold separately.
Application:
To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Buff: 18" Column Cover Cap: 2" high edge, 5" at peak, 18" X 18" outside dimension: 1 piece per box
$58.07
Product Description:
The Buff 18” Column Cover Cap is made for your NextStone Column Wrap with a clean finish. It has a rough texture to make it look like stone with a gently peaked top that gives it a solid look. The buff colour goes well with a range of tones without overpowering the design.
Each cap measures 18 inches by 18 inches on the outside, with a 16-inch inside opening to fit over a column wrap. The edge stands 2 inches high and reaches 5 inches at the peak. One cap comes in each box.
Fitting these is easy using polyurethane adhesive. You don’t need paint, caulk, or complicated tools.
Style:
18" Column Wrap Cap
Colour:
Buff
Texture:
Rough texture
Height:
5" at peak
Width:
18" x 18" outside dimension, 16" x 16" inside dimension
Thickness:
2" edge, 5" at peak
Box Quantity:
1 piece
Installation:
NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap. Column Wraps are sold separately.
Application:
To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Charcoal: 18" Column Cover Cap: 2" high edge, 5" at peak, 18" X 18" outside dimension: 1 piece per box
$58.07
Product Description:
The Charcoal 18 inch Column Cover Cap is made to top off your NextStone Column Wrap with a solid finished look. It has a rough stone texture and a peaked centre, giving your post a clean finish without looking too polished. The charcoal colour blends well with both light and dark wraps.
Each cap has an outer dimension of 18” x 18”, with a 16” x 16” interior to fit over a 30 inch NextStone Country Ledgestone or Slatestone Column Wrap. The edge height is 2 inches, rising to 5 inches at the peak. There is one cap in each box.
Installing these is easy. Just use a polyurethane adhesive to fix it on top.
Style:
18" Column Wrap Cap
Colour:
Charcoal
Texture:
Rough texture
Height:
5" at peak
Width:
18" x 18" outside dimension, 16" x 16" inside dimension
Thickness:
2" edge, 5" at peak
Box Quantity:
1 piece
Installation:
NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap. Column Wraps are sold separately.
Application:
To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
