Catalogue
Our Products
10" Post Cover Cap
18" Column Cap
30" Column Wrap
Converter Kit
NextStone Ledger Outside Corner Piece
NextStone Wall Panel
NextStone Wall Panel Outside Corner
Post Cover
All products
Column Wrap Cap 18"
Column Wraps
Country Ledgestone 47" Post Cover
Country Ledgestone Column Wraps
NextStone Accessories
NextStone Country Ledgestone
NextStone Slatestone
Post Cover Caps 10"
Post Cover Converter Kits
Sandstone Flush Mount Outside Corner
Sandstone Ledger / Sill
Sandstone Ledger / Sill Inside Corner
Sandstone Ledger / Sill Outside Corner
Sandstone Window and Door Trim
Slatestone 41" Post Cover
Slatestone Column Wrap
Stone Panels
Andean Onyx: Country Ledgestone Outside Corner: 5.17 lnft per box/ 4 pieces/ 2 right and 2 left
$118.85
Product Description:
The Andean Onyx County Ledgestone Outside Corner is made to finish wall edges neatly and match your flat panel installation. Each box includes four corner pieces, with two rights and two lefts, giving you just over five linear feet of coverage.
These corners fit together using NextStone’s interlocking system. Once your surface is prepped, installing these is easy as you don’t need any mortar and there’s no mess. All you need is screws and a starter kit.
The onyx colour works well with both light and dark walls. It’s a clean look that carries across the whole project.
Style:
Country Ledgestone Outside Corner
Colour:
Andean Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
8 1/4" x 5 1/2"
Thickness:
1 1/2"
Box Quantity:
4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners)
Coverage:
5.17 linear feet per box (approx. 5 sqft of flat area)
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats and corners:
1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Appalachian Gray: Country Ledgestone Flat Panel: 15 1/2" high, 43 1/2" wide, 1 1/2" thick: 4 pieces per box: 16.96 sqft coverage per box: sold by the full box
$296.63
Product Description:
The Appalachian Gray Country Ledgestone Flat Panel gives you the look of natural stone without the mess or weight. Its dry-stacked style and soft gray colour work well indoors or out, adding a clean, rustic finish to any wall.
Panels lock together starting with a metal starter strip, and you can screw them straight into your wall surface. There’s no mortar involved, and no need for special tools either.
Each box covers just under 17 square feet and includes four lightweight panels. It’s a simple way to get the look of real stone without any of the mess.
Style:
Country Ledgestone Flat Panel
Colour:
Appalachian Gray
Accessory Colour:
Gray
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43 1/2"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
16.96 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Teton Buff: Country Ledgestone 30" Column Wrap: 30" tall, 1 1/2" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Teton Buff Country Ledgestone 30” Column Wrap is designed to give boxed columns a realistic stone finish without the weight or mess of real masonry. Each wrap includes four locking pieces that fit together easily using the built-in groove system.
This wrap stands 30 inches tall and measures 16” x 16” on the outside, with an inner opening of just under 14”/. It’s 1½ inches thick and is designed to be attached to a structural box. Column caps are sold separately.
The Teton Buff colour has a warm, natural look that pairs well with wood trim, stucco, or siding. An excellent choice for all different exterior styles.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Country Ledgestone 30" Column Wrap
Colour:
Teton Buff
Accessory Colour:
Buff
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Himalayan Brown: Country Ledgestone 47" Post Cover: 47" tall, 1 3/4" thick: 8" X 8" outside dimensions: one 2 piece post cover per box
$176.87
Product Description:
The Himalayan Brown Country Ledgestone 47” Post Cover gives wood posts a clean, stone-look finish. Each stands 47 inches tall and fits over 4 or 6-inch posts with an 8” x 8” outer profile. The box includes two interlocking panels that form a full wrap.
The dry-stacked texture adds depth to basements, porches, and deck columns. You can glue or screw the panels together. You don’t need to paint or caulk it; no extra prep is required.
The brown tone works well with neutral siding and trim. For use with vertical services only.
Style:
Country Ledgestone 47" Post Cover
Colour:
Himalayan Brown
Accessory Colour:
Brown
Texture:
Dry stacked stone look
Height:
47"
Width:
Outside dimensions: 8" x 8", Inside dimensions: 6" x 6"
Thickness:
1 1/2"
Box Quantity:
2 pieces
Coverage:
47" high (for 4 or 6 inch wood post)
Installation:
To cover a 4 or 6-inch wood post. Instructions are available in each box. Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Himalayan Brown: Country Ledgestone 30" Column Wrap: 30" tall, 1 1/2" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Himalayan Brown Country Ledgestone 30” Column wrap is an easy way to give existing boxed columns a clean, dry-stacked stone look. Each wrap includes four interlocking pieces that slide together using the patented groove system.
It measures 30 inches tall with outside dimensions of 16” x 16” and an inside opening of just under 14”. The wrap is 1½ inches thick and is designed to be fixed to a structural box. Column caps are available separately.
The Himalayan Brown finish brings out warm tones that suit brick, wood, or neutral siding.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Country Ledgestone 30" Column Wrap
Colour:
Himalayan Brown
Accessory Colour:
Brown
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Teton Buff: Country Ledgestone Outside Corner: 5.17 lnft per box/ 4 pieces/ 2 right and 2 left
$118.85
Product Description:
The Teton Buff Country Ledgestone Outside Corners are shaped to match the rugged, layered look of the panels. Each box gives you two left and two right pieces, covering just over five linear feet. They’re labelled on the back so you’ll know which side goes where.
They interlock with the panels and hide all fasteners once in place. All you need are some screws and a bit of time. You’ll get an excellent finish that lines up well with the rest of your wall.
The soft buff tone blends in easily across most natural colour schemes.
Style:
Country Ledgestone Outside Corner
Colour:
Teton Buff
Accessory Colour:
Buff
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
8 1/4" x 5 1/2"
Thickness:
1 1/2"
Box Quantity:
4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners)
Coverage:
5.17 linear feet per box(approx. 5 sqft of flat area)
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats and corners:
1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Andean Onyx: Country Ledgestone 30" Column Wrap: 30" tall, 1 1/2" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Andean Onyx Country Ledgestone 30” Column Wrap gives your columns a bold, stone-finished upgrade without heavy lifting. It’s designed to wrap around an existing boxed post using four pieces that click into place with the patented groove system. This means you don’t need extra tools or any adhesives.
This style works exceptionally well with dark trims, modern builds, or homes with black or grey accents. The stacked stone texture has a natural depth that looks good up close or from the street.
Please note that this is not a standalone column. You’ll need a structural box underneath and may want to add a cap to finish the look.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Country Ledgestone 30" Column Wrap
Colour:
Andean Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Andean Onyx: Country Ledgestone Flat Panel: 15 1/2" high, 43 1/2" wide, 1 1/2" thick: 4 pieces per box: 16.96 sqft coverage per box: sold by the full box
$296.63
Product Description:
The Andean Onyx Country Ledgestone Flat Panel gives you the look of real stone without any of the hard work. These panels fit together easily using a metal starter strip and a few screws. There’s no mortar needed, and no mess to clean up when you are done.
Each panel weighs just under five pounds, which makes it easy to carry and install, even if it's your first time tackling a project like this. The dry-stacked texture brings a natural, layered feel, and the dark onyx colour pairs well with most trims and finishes.
For corners or transitions, you can pair them with matching NextStone accessories.
Style:
Country Ledgestone Flat Panel
Colour:
Andean Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43 1/2"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
16.96 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Teton Buff: Country Ledgestone Flat Panel: 15 1/2" high, 43 1/2" wide, 1 1/2" thick: 4 pieces per box: 16.96 sqft coverage per box: sold by the full box
$296.63
Product Description:
The Teton Buff Country Ledgestone Flat Panels are a simple way to get that stacked stone look without the weight or mess. Each panel is just over three and a half feet wide, and you get four per box, covering nearly 17 square feet.
These panels lock into each other cleanly and start with a metal strip along the base of your wall. No mortar needed. Just grab some screws and your basic tools, and you’re set.
They’re made for vertical surfaces only and are best suited for full wall coverage or accents. You’ll get a great result with less effort than traditional stonework.
Style:
Country Ledgestone Flat Panel
Colour:
Teton Buff
Accessory Colour:
Buff
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43 1/2"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
16.96 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Appalachian Gray: Country Ledgestone 30" Column Wrap: 30" tall, 1 1/2" thick: 16" X 16" outside dimensions: one 4 piece column wrap per box
$237.59
Product Description:
The Appalachian Gray Country Ledgestone 30” Column Wrap is the perfect way to update your exterior with a clean, dry-stacked stone. It’s an excellent idea for adding character to porch posts or square columns without any mess of real stone.
Each box includes four interlocking pieces that wrap around your existing structure. The patented groove system keeps everything in place, and the installation is easy. These wraps are designed for vertical surfaces and work best when paired with an 18” cap.
The soft gray finish works well with a range of colours and styles.
Note: This is NOT a stand-alone product. There must be a box to attach to.
Style:
Country Ledgestone 30" Column Wrap
Colour:
Appalachian Gray
Accessory Colour:
Gray
Texture:
Dry stacked stone look
Height:
30"
Width:
Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8")
Installation:
This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Teton Buff: Country Ledgestone 47" Post Cover: 47" tall, 1 3/4" thick: 8" X 8" outside dimensions: one 2 piece post cover per box
$176.87
Product Description:
The Teton Buff Country Ledgestone Post gives any 4” or 6” post a natural stacked stone look in minutes. It stands 47 inches tall with 8” x 8” outer dimensions and comes as a two-piece wrap.
Each box includes both panels. Once fitted together, they snap around the post and hold firmly with glue or screws. If you’re working with a 4” post, you’ll need the converter kit. Post caps are sold separately to match.
These are a great choice for deck posts, basement posts, or anywhere that you want to look like stone. The Teton buff also has a nice light tone that works well with other colours.
Style:
Country Ledgestone 47" Post Cover
Colour:
Teton Buff
Accessory Colour:
Buff
Texture:
Dry stacked stone look
Height:
47"
Width:
Outside dimensions: 8" x 8", Inside dimensions: 6" x 6"
Thickness:
1 1/2"
Box Quantity:
2 pieces
Coverage:
47" high (for 4 or 6 inch wood post)
Installation:
To cover a 4 or 6-inch wood post. Instructions are available in each box. Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Himalayan Brown: Country Ledgestone Flat Panel: 15 1/2" high, 43 1/2" wide, 1 1/2" thick: 4 pieces per box: 16.96 sqft coverage per box: sold by the full box
$296.63
Product Description:
The Himalayan Brown Country Ledgestone Flat Panel gives your project a warm, natural look with a dry-stacked stone texture. Each panel measures just over three and a half feet wide and comes in a box of four, covering nearly 17 square feet.
These panels are designed to fit together neatly using a metal starter strip, so no mortar or mess is involved. Once your surface is prepped, it’s just a matter of lining them up and fastening them into place.
They're lightweight, easy to handle, and ideal for vertical wall surfaces. If you're using them on the outside of your home, you can pair them with matching corners and ledgers.
Style:
Country Ledgestone Flat Panel
Colour:
Himalayan Brown
Accessory Colour:
Brown
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
43 1/2"
Thickness:
1 1/2"
Box Quantity:
4 pieces
Coverage:
16.96 square feet per box
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats only:
1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Andean Onyx: Country Ledgestone 47" Post Cover: 47" tall, 1 3/4" thick: 8" X 8" outside dimensions: one 2 piece post cover per box
$176.87
Product Description:
The Andean Onyx Country Ledgestone Post Cover adds a clean, stone-look finish to wood posts. It wraps around with two interlocking panels that screw of glue together, which create a lovely surface that looks great.
The dry-stacked texture works well for basement posts, as well as deck columns and porch features. You do not need to paint or caulk it, just like it up and fasten it.
Converter kits and post caps are sold separately. The Onyx tones mix well with darker siding or trim.
Style:
Country Ledgestone 47" Post Cover
Colour:
Andean Onyx
Accessory Colour:
Onyx
Texture:
Dry stacked stone look
Height:
47"
Width:
Outside dimensions: 8" x 8", Inside dimensions: 6" x 6"
Thickness:
1 1/2"
Box Quantity:
2 pieces
Coverage:
47" high (for 4 or 6 inch wood post)
Installation:
To cover a 4 or 6-inch wood post. Instructions are available in each box. Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Appalachian Gray: Country Ledgestone 47" Post Cover: 47" tall, 1 3/4" thick: 8" X 8" outside dimensions: one 2 piece post cover per box
$176.87
Product Description:
The Appalachian Gray Country Ledgestone Post Cover gives wood posts a neat, finished look with dry-stacked texture. Two interlocking panels fit snugly around the post and fasten with glue or screws.
It’s an excellent choice for deck supports, porch posts, or anywhere you want a bit of stone without any mess. You don't need any paint or sealant, and the final result will hold up well across all seasons.
The gray colour works nicely with cooler siding tones or natural wood. For vertical surfaces only.
Style:
Country Ledgestone 47" Post Cover
Colour:
Appalachian Gray
Accessory Colour:
Gray
Texture:
Dry stacked stone look
Height:
47"
Width:
Outside dimensions: 8" x 8", Inside dimensions: 6" x 6"
Thickness:
1 1/2"
Box Quantity:
2 pieces
Coverage:
47" high (for 4 or 6 inch wood post)
Installation:
To cover a 4 or 6-inch wood post. Instructions are available in each box. Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Himalayan Brown: Country Ledgestone Outside Corner: 5.17 lnft per box/ 4 pieces/ 2 right and 2 left
$118.85
Product Description:
The Himalayan Brown Country Ledgestone Outside Corners give your project a clean, finished edge. Each box comes with four pieces, two left and two right, which fit together to wrap around 90-degree corners.
Once installed, you’ll get just over five linear feet per box, with an interlocking design that hides all fasteners. The panels are lightweight and easy to handle, and the dry stack texture adds a rustic feel. You won’t need mortar or paint, just basic tools and screws to get started.
This corner set perfectly matches the Himalayan Brown flat panels and works best on vertical surfaces.
Style:
Country Ledgestone Outside Corner
Colour:
Himalayan Brown
Accessory Colour:
Brown
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
8 1/4" x 5 1/2"
Thickness:
1 1/2"
Box Quantity:
4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners)
Coverage:
5.17 linear feet per box(approx. 5 sqft of flat area)
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats and corners:
1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Appalachian Gray: Country Ledgestone Outside Corner: 5.17 lnft per box/ 4 pieces/ 2 right and 2 left
$118.85
Product Description:
The Appalachian Gray Country Ledgestone Outside Corner is built to match your panels and finish off your corners with a clean, stacked-stone look. Each box includes four lightweight pieces, with a mix of left and right corners, covering just over five linear feet in total.
These corners slot together using a hidden interlock system, so there's no need for caulking or extra finishing. Just screw them in and go. Once installed, the dry-stacked texture and soft gray colour help tie the project together.
These work best when paired with matching NextStone panels and accessories.
Style:
Country Ledgestone Outside Corner
Colour:
Appalachian Gray
Accessory Colour:
Gray
Texture:
Dry stacked stone look
Height:
15 1/2"
Width:
8 1/4" x 5 1/2"
Thickness:
1 1/2"
Box Quantity:
4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners)
Coverage:
5.17 linear feet per box(approx. 5 sqft of flat area)
Installation:
4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.
Application:
Vertical surfaces only. Not suitable for floor applications.
How to Calculate flats and corners:
1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.
Charcoal: 18" Column Cover Cap: 2" high edge, 5" at peak, 18" X 18" outside dimension: 1 piece per box
$58.07
Product Description:
The Charcoal 18 inch Column Cover Cap is made to top off your NextStone Column Wrap with a solid finished look. It has a rough stone texture and a peaked centre, giving your post a clean finish without looking too polished. The charcoal colour blends well with both light and dark wraps.
Each cap has an outer dimension of 18” x 18”, with a 16” x 16” interior to fit over a 30 inch NextStone Country Ledgestone or Slatestone Column Wrap. The edge height is 2 inches, rising to 5 inches at the peak. There is one cap in each box.
Installing these is easy. Just use a polyurethane adhesive to fix it on top.
Style:
18" Column Wrap Cap
Colour:
Charcoal
Texture:
Rough texture
Height:
5" at peak
Width:
18" x 18" outside dimension, 16" x 16" inside dimension
Thickness:
2" edge, 5" at peak
Box Quantity:
1 piece
Installation:
NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap. Column Wraps are sold separately.
Application:
To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Buff: 18" Column Cover Cap: 2" high edge, 5" at peak, 18" X 18" outside dimension: 1 piece per box
$58.07
Product Description:
The Buff 18” Column Cover Cap is made for your NextStone Column Wrap with a clean finish. It has a rough texture to make it look like stone with a gently peaked top that gives it a solid look. The buff colour goes well with a range of tones without overpowering the design.
Each cap measures 18 inches by 18 inches on the outside, with a 16-inch inside opening to fit over a column wrap. The edge stands 2 inches high and reaches 5 inches at the peak. One cap comes in each box.
Fitting these is easy using polyurethane adhesive. You don’t need paint, caulk, or complicated tools.
Style:
18" Column Wrap Cap
Colour:
Buff
Texture:
Rough texture
Height:
5" at peak
Width:
18" x 18" outside dimension, 16" x 16" inside dimension
Thickness:
2" edge, 5" at peak
Box Quantity:
1 piece
Installation:
NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap. Column Wraps are sold separately.
Application:
To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Brown: 18" Column Cover Cap: 2" high edge, 5" at peak, 18" X 18" outside dimension: 1 piece per box
$58.07
Product Description:
The Brown 18 inch Column Cover Cap finishes off your NextStone Column Wrap with a clean finish. It has a rough texture and a peaked top that gives it a natural look, despite it being plastic. The brown tone adds a warm, natural feel that works with different colours.
Each cap is 18 inches wide outside, with a 16-inch opening underneath to fit over a 30 inch column wrap. The edge stands at 2 inches high and reaches 5 inches at the peak.
To fit these, use polyurethane adhesive. No paint or extra steps are needed, and once it's in place, it will stay in place.
Style:
18" Column Wrap Cap
Colour:
Brown
Texture:
Rough texture
Height:
5" at peak
Width:
18" x 18" outside dimension, 16" x 16" inside dimension
Thickness:
2" edge, 5" at peak
Box Quantity:
1 piece
Installation:
NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap. Column Wraps are sold separately.
Application:
To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Gray: 18" Column Cover Cap: 2" high edge, 5" at peak, 18" X 18" outside dimension: 1 piece per box
$58.07
Product Description:
The Gray 18 inch Column Cover Cap is made to top off your NextStone Column Wrap with a finished look. It has a natural stone texture and a peaked profile, which gives columns a solid and professional appearance. The grey shade works well in modern and traditional settings.
Each cap measures 18 inches across on the outside and 16 inches inside, fitting neatly over 30 inch Country Ledgestone or Slatestone Column Wraps.
Installing them is quick and easy with polyurethane adhesive, with no cutting or painting. Once set, it holds in place and won’t move.
Style:
18" Column Wrap Cap
Colour:
Gray
Texture:
Rough texture
Height:
5" at peak
Width:
18" x 18" outside dimension, 16" x 16" inside dimension
Thickness:
2" edge, 5" at peak
Box Quantity:
1 piece
Installation:
NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap. Column Wraps are sold separately.
Application:
To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Onyx: 18" Column Cover Cap: 2" high edge, 5" at peak, 18" X 18" outside dimension: 1 piece per box
$58.07
Product Description:
The Onyx 18" Column Cover Cap is a clean way to finish your column wraps. It has a rough stone texture and a peaked top, designed to sit firmly on top of a 30" Country Ledgestone or Slatestone Column Wrap. The dark onyx colour brings a solid, bold finish to any setup.
It fits columns with a 16" x 16" top and measures 18" x 18" on the outside. One cap per box.
Installing it is straightforward. Just apply polyurethane adhesive to press it into place. Column wraps are sold separately.
Style:
18" Column Wrap Cap
Colour:
Onyx
Texture:
Rough texture
Height:
5" at peak
Width:
18" x 18" outside dimension, 16" x 16" inside dimension
Thickness:
2" edge, 5" at peak
Box Quantity:
1 piece
Installation:
NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap. Column Wraps are sold separately.
Application:
To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Charcoal: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
The Charcoal 10” Post Cover Cap is made to finish your post covers neatly. It’s shaped with a slight peak and a rough stone texture, designed to fit snugly on top of a 47” Country Ledgestone or 41" Slatestone Post Cover. The charcoal colour gives it a clean, modern look.
It measures 10” x 10” on the outside and fits over posts with an 8” x 8” top. The edge stands 1.5 inches tall and rises 3 inches at the peak. You get one cap per box.
To install it, just apply polyurethane adhesive and press it into place. No extra tools or trimming needed.
Style:
10" Post Cover Cap
Colour:
Charcoal
Texture:
Rough texture
Height:
3" at peak
Width:
10" x 10" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Buff: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
The Buff 10" Post Cover Cap is built to finish the top of your NextStone post covers with a clean, simple look. It has a rough stone texture and a soft buff colour that works well in most settings.
Each cap has a 10" x 10" outer dimension and fits nicely over posts with an 8" x 8" top. The edge is 1.5 inches high, rising to 3 inches at the peak. It’s made to match the 47" Country Ledgestone or 41" Slatestone Post Covers.
Installation is quick and easy. Just apply polyurethane adhesive and press it into place. One piece per box.
Style:
10" Post Cover Cap
Colour:
Buff
Texture:
Rough texture
Height:
3" at peak
Width:
10" x 10" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Brown: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
This 10” Post Cover Cap in brown is made to finish your NextStone post wraps with a clean, peaked top. The rough stone texture adds a natural touch, and the brown colour works well with various panels.
It measures 10" x 10" on the outside and fits over an 8” x 8” post. The edge is 1.5 inches high and rises to 3 inches at the peak. Designed to work with the 47-inch Country Ledgestone or 41-inch Slatestone Post Covers.
Just apply polyurethane adhesive and press it in place. It's quick to install and sold as a single piece per box.
Style:
10" Post Cover Cap
Colour:
Brown
Texture:
Rough texture
Height:
3" at peak
Width:
10" x 10" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Gray: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
The Gray 10” Post Cover Cap sits on your NextStone post wraps. It has a rough texture and a peaked shape that gives each post a finished look. The colour is easy to match with most styles.
Each cap has an outer size of 10” x 10” and fits neatly over an 8” x 8” post. The edge height is 1.5 inches, rising to 3 inches at the peak. It’s made to fit over the 47” Country Ledgestone or 41” Slatestone Post Covers.
There is one cap per box. Attach it with polyurethane adhesive and press it into place.
Style:
10" Post Cover Cap
Colour:
Gray
Texture:
Rough texture
Height:
3" at peak
Width:
10" x 10" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Onyx: 10" Post Cover Cap: 1 1/2" high edge, 3" at peak, 10" X 10" outside dimension: 1 piece per box
$52.79
Product Description:
The Onyx 10" Post Cover Cap adds a clean finish to your NextStone post wraps. It has a rough texture with a peaked top and a deep charcoal colour that works well with both light and dark tones.
Each cap measures 10.5” x 10.5” on the outside and fits perfectly over an 8” x 8” post. The edge height is 1.5 inches, rising to 3 inches at the peak. This cap is made to fit over the 47” Country Ledgestone or 41” Slatestone Post Covers.
Comes with one per box. Installation is simple using polyurethane adhesive. Just line it up and press it down.
Style:
10" Post Cover Cap
Colour:
Onyx
Texture:
Rough texture
Height:
3" at peak
Width:
10 1/2" x 10 1/2" outside dimension, 8" x 8" inside dimension
Thickness:
1 1/2" edge, 3" at peak
Box Quantity:
1 piece
Installation:
NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers. Post Covers are sold separately.
Application:
To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Country Ledgestone Post Cover Converter Kit: for use when installing Country Ledgestone Post Covers onto a 4" X 4" post: 1 set per box
$32.99
Product Description:
The Country Ledgestone Post Cover Converter Kit lets you fit a 4” x 4” post with NextStones Country Ledgestone Post Covers. Each kit contains four polyurethane rings, one for the top, one for the bottom, and two for the middle.
The rings are screwed directly into the wood post and build it out to a 6” x 6” size. If your post doesn’t allow the ring to slide on, you can cut it in half or diagonally.
It's a simple solution that makes your post cover installation easier. This kit is for vertical surfaces only.
Style:
Country Ledgestone Post Cover Converter Kit
Colour:
Neutral
Texture:
Smooth
Width:
Outside dimensions: 6" x 6", Inside dimensions: 4" x 4"
Thickness:
1 1/2"
Box Quantity:
4 pieces, 1 top, 1 bottom, 2 middle supports
Installation:
NextStone Post Cover Converter Kit Polyurethane rings are made to extend a TRUE 4" x 4" post to 6" x 6" for NextStone Post Covers. Screwed into the bottom, top and in the middle of the wood post. Converter kits can be but diagonally or in half to accommodate posts that do not allow kits to slide over. Post Covers and Caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
Slatestone Post Cover Converter Kit: for use when installing Slatestone Post Covers onto a 4" X 4" post: 1 set per box
$23.75
Product Description:
The Slatestone Post Cover Convert Kit is designed to fit 4” x 4” wood posts, allowing NextStone Slatestone Post Covers to be installed securely. The kit extends the post to 6” x 6” using lightweight polyurethane rings.
In each box, there are four pieces. One top, one bottom, and two middle supports. The rings screw directly into the post and can be cut in half diagonally if needed. This gives you flexibility for posts where a full ring won’t slide over.
This kit is for vertical use only. Post covers and caps are sold separately.
Style:
Slatestone Post Cover Converter Kit
Colour:
Neutral
Texture:
Smooth
Width:
Outside dimensions: 6" x 6", Inside dimensions: 4" x 4"
Thickness:
1 1/2"
Box Quantity:
4 pieces, 1 top, 1 bottom, 2 middle supports
Installation:
NextStone Post Cover Converter Kit Polyurethane rings are made to extend a TRUE 4" x 4" post to 6" x 6" for NextStone Post Covers. Screwed into the bottom, top and in the middle of the wood post. Converter kits can be but diagonally or in half to accommodate posts that do not allow kits to slide over. Post Covers and Caps are sold separately.
Application:
Vertical surfaces only. Not suitable for floor applications.
Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.
