Products

Product Description: The Andean Onyx County Ledgestone Outside Corner is made to finish wall edges neatly and match your flat panel installation. Each box includes four corner pieces, with two rights and two lefts, giving you just over five linear feet of coverage. These corners fit together using NextStone’s interlocking system. Once your surface is prepped, installing these is easy as you don’t need any mortar and there’s no mess. All you need is screws and a starter kit.  The onyx colour works well with both light and dark walls. It’s a clean look that carries across the whole project. Style:  Country Ledgestone Outside Corner Colour: Andean Onyx Accessory Colour: Onyx Texture: Dry stacked stone look Height: 15 1/2" Width: 8 1/4" x 5 1/2" Thickness: 1 1/2" Box Quantity: 4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners) Coverage: 5.17 linear feet per box (approx. 5 sqft of flat area) Installation: 4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.  Application: Vertical surfaces only. Not suitable for floor applications. How to Calculate flats and corners: 1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.

Product Description: The Appalachian Gray Country Ledgestone 30” Column Wrap is the perfect way to update your exterior with a clean, dry-stacked stone. It’s an excellent idea for adding character to porch posts or square columns without any mess of real stone.  Each box includes four interlocking pieces that wrap around your existing structure. The patented groove system keeps everything in place, and the installation is easy. These wraps are designed for vertical surfaces and work best when paired with an 18” cap. The soft gray finish works well with a range of colours and styles.  Note: This is NOT a stand-alone product. There must be a box to attach to. Style:  Country Ledgestone 30" Column Wrap Colour: Appalachian Gray Accessory Colour: Gray Texture: Dry stacked stone look Height: 30" Width: Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8" Thickness: 1 1/2" Box Quantity: 4 pieces Coverage: 30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8") Installation: This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Appalachian Gray Country Ledgestone Outside Corner is built to match your panels and finish off your corners with a clean, stacked-stone look. Each box includes four lightweight pieces, with a mix of left and right corners, covering just over five linear feet in total. These corners slot together using a hidden interlock system, so there's no need for caulking or extra finishing. Just screw them in and go. Once installed, the dry-stacked texture and soft gray colour help tie the project together. These work best when paired with matching NextStone panels and accessories. Style:  Country Ledgestone Outside Corner Colour: Appalachian Gray Accessory Colour: Gray Texture: Dry stacked stone look Height: 15 1/2" Width: 8 1/4" x 5 1/2" Thickness: 1 1/2" Box Quantity: 4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners) Coverage: 5.17 linear feet per box(approx. 5 sqft of flat area) Installation: 4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.  Application: Vertical surfaces only. Not suitable for floor applications. How to Calculate flats and corners: 1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.

Product Description: This 10” Post Cover Cap in brown is made to finish your NextStone post wraps with a clean, peaked top. The rough stone texture adds a natural touch, and the brown colour works well with various panels. It measures 10" x 10" on the outside and fits over an 8” x 8” post. The edge is 1.5 inches high and rises to 3 inches at the peak. Designed to work with the 47-inch Country Ledgestone or 41-inch Slatestone Post Covers. Just apply polyurethane adhesive and press it in place. It's quick to install and sold as a single piece per box. Style:  10" Post Cover Cap Colour: Brown Texture: Rough texture Height: 3" at peak Width: 10" x 10" outside dimension, 8" x 8" inside dimension Thickness: 1 1/2" edge, 3" at peak Box Quantity: 1 piece Installation: NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers.  Post Covers are sold separately. Application: To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Brown Sandstone Flush Mount Outside Corner is a great choice for finishing off wall edges with a clean, professional line. Each piece measures 48 inches and has a 3” x 3” profile. Two pieces come in every box, covering a total of eight linear feet. It’s made to pair with NextStone panels but also works well as a trim piece when you want a simpler edge. The interlocking design means there is no need to caulk or paint, just a quick, tidy fit that holds up well. Use on vertical surfaces only. The brown tone adds warmth to the finish, though, like any product photo, the colour might change slightly depending on lighting. Style:  Sandstone Flush Mount Outside Corner Colour: Brown Texture: Rough texture Width: 48" long Thickness: 3" x 3" Box Quantity: 2 pieces per box (8 linear feet per box) Coverage: 48" per piece Installation: NextStone Sandstone Sandstone Flush Mount Outside Corner can also be used as a general finished termination trim piece. To terminate the outside corner ofa NextStone flat panel in place of outside corners. NextStone's patented interlocking accessory design does not require caulk or paint. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Brown Sandstone Ledger / Sill Insider Corner gives your ledger install a clean, finished look where two panelled walls meet at an inside angle. Each piece measures 9.75 inches by 7.625 inches and is 2.5 inches high. You get two in each box. This corner piece connects without the need to cut angles. It uses NextStone’s interlocking design. This means no caulk or paint is needed. It works especially well when transitioning between stone panels and other exterior materials like siding, brick, or stucco.  Built for use with vertical walls only. It's lightweight, solid, and ready to fit straight into your project. Style:  Sandstone Ledger / Sill Inside Corner Colour: Brown Texture: Rough texture, rock faced Height: 2 1/2" Width: 9 3/4" x 7 5/8" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: inside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Inside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Brown Sandstone Ledger / Sill Outside Corner has been made to finish off the top row of stone panels that wrap around an exterior corner. Each piece measures 6.25 inches by 4.25 inches and stands 2.5 inches high. Two pieces come in each box. It's a simple way to avoid miter cuts while maintaining a consistent look around corners. This piece continues the ledger line cleanly and helps transition to brick, siding, or stucco. It uses the same interlocking design as the rest of the system. Lightweight and durable, it’s easy to install and made for vertical use only. Style:  Sandstone Ledger / Sill Outside Corner Colour: Brown Texture: Rough texture, rock faced Height: 2 1/2" Width: 6 1/4" x 4 1/4" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: Outside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Outside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Brown Sandstone Ledger is made to finish off the top row of flat panels. Its sloped design helps water run off and gives a clean edge when switching to brick, siding, or stucco. It has a rough, rock-faced texture and a solid look while still being lightweight. Each piece measures 48 inches long, 4 inches deep, and 2.5 inches high. You get four in a box, covering 16 linear feet in total. Like all NextStone accessories, it uses an interlocking design. That means no need for caulking or paint, and the final result looks great each time. This ledge is for vertical use only. Corner pieces are sold separately. Style:  Sandstone Ledger / Sill Colour: Brown Texture: Rough texture, rock faced Height: 2 1/2" Width: 48" long Thickness: 4" deep Box Quantity: 4 pieces per box (16 linear feet per box) Coverage: 48"per piece Installation: To terminate the top row of NextStone flat panels. NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Brown Sandstone Window and Door Trim is made for finishing windows, doors, or flat panel edges with a strong, clean line. Each piece measures 48 inches in length, with a 2.25-inch thickness and 3.5-inch depth. With four pieces in the box, you’ll have 16 linear feet to work with. It goes well with NextStone panels and can be used where a general trim or termination piece is needed. Installation is straightforward thanks to the interlocking design. No caulking or painting required.  This trim is for vertical use only. The brown finish offers a natural, earthy tone, but color may vary slightly depending on lighting and screen settings. Style:  Sandstone Window and Door Trim Colour: Brown Texture: Rough texture Width: 48" long Thickness: 2 1/4" x 3 1/2" Box Quantity: 4 pieces per box (16 linear feet per box) Coverage: 48" per piece Installation: NextStone Sandstone Sandstone WIndow and Door Trim can also be used as a general finished termination trim piece. To terminate the outside corner of a NextStone flat panel in place of outside corners. NextStone's patented interlocking accessory design does not require caulk or paint. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Brunswick Brown Slatestone 30” Column Wrap is designed to wrap around a boxed column and give it a dry-stacked stone finish. It comes in four interlocking pieces that fit snugly together using a groove system, which keeps everything aligned and secure. Each wrap stands 30 inches tall, with outer dimensions of 16” x 16” and inner dimensions just under 14”. The panels are 1¾ inches thick. This wrap must be installed around a solid box as it's not made to stand alone. Column caps are sold separately.  The Brunswick Brown colour has a rich, earthy tone that works well with wood, stone, and neutral siding.  Note: This is NOT a stand-alone product. There must be a box to attach to. Style:  Slatestone 30" Column Wrap Colour: Brunswick Brown Accessory Colour: Brown Texture: Dry stacked stone look Height: 30" Width: Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8" Thickness: 1 3/4" Box Quantity: 4 pieces Coverage: 30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8") Installation: This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Brunswick Brown Slatestone Flat Panel gives you the look of real stacked stone without the usual weight or mess. With warm brown tones and deep grout lines, it’s a solid choice for exterior walls, skirting, or outdoor accents. Each panel locks into place using a built-in groove system, so once you’ve added the starter strip, installation moves quickly. There’s no need for mortar or paint, and the finish looks neat from start to finish. These panels are built to match with NextStone corners and other accessories, which helps everything line up well visually. And with 16.4 square feet of coverage in each box, it’s easy to plan out what you’ll need for the job. Style:  Slatestone Flat Panel Colour: Brunswick Brown Accessory Colour: Brown Texture: Dry stacked stone look Height: 15 1/2" Width: 43" Thickness: 1 3/4" Box Quantity: 4 pieces Coverage: 16.4 square feet per box Installation: 4 foot metal starter strip is used to begin first row of NextStone panels. Application: Vertical surfaces only. Not suitable for floor applications. How to Calculate flats only: 1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.

Product Description: The Brunswick Brown Slatestone Outside Corner gives you a finished edge that matches the warmth and texture of your flat panels. With its dry-stacked stone look and earthy brown tones, it blends right in and ties everything together. Each box includes two left and two right corner pieces, moulded with the same detail as the panels and numbered for an easy install. They interlock cleanly and hide the screws, so once it’s up, it all just looks like stone.  If your project has exposed edges or 90-degree turns, these are what keep it looking neat and built-in. Style:  Slatestone Outside Corner Colour: Brunswick Brown Accessory Colour: Brown Texture: Dry stacked stone look Height: 15 1/2" Width: 11.5" x 7 1/4" Thickness: 1 3/4" Box Quantity: 4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners) Coverage: 5.17 linear feet per box (approx. 5 sqft of flat area) Installation: 4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.  Application: Vertical surfaces only. Not suitable for floor applications. How to Calculate flats and corners: 1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.

Product Description: The Buff 10" Post Cover Cap is built to finish the top of your NextStone post covers with a clean, simple look. It has a rough stone texture and a soft buff colour that works well in most settings. Each cap has a 10" x 10" outer dimension and fits nicely over posts with an 8" x 8" top. The edge is 1.5 inches high, rising to 3 inches at the peak. It’s made to match the 47" Country Ledgestone or 41" Slatestone Post Covers. Installation is quick and easy. Just apply polyurethane adhesive and press it into place. One piece per box. Style:  10" Post Cover Cap Colour: Buff Texture: Rough texture Height: 3" at peak Width: 10" x 10" outside dimension, 8" x 8" inside dimension Thickness: 1 1/2" edge, 3" at peak Box Quantity: 1 piece Installation: NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers.  Post Covers are sold separately. Application: To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Buff 18” Column Cover Cap is made for your NextStone Column Wrap with a clean finish. It has a rough texture to make it look like stone with a gently peaked top that gives it a solid look. The buff colour goes well with a range of tones without overpowering the design. Each cap measures 18 inches by 18 inches on the outside, with a 16-inch inside opening to fit over a column wrap. The edge stands 2 inches high and reaches 5 inches at the peak. One cap comes in each box. Fitting these is easy using polyurethane adhesive. You don’t need paint, caulk, or complicated tools. Style:  18" Column Wrap Cap Colour: Buff Texture: Rough texture Height: 5" at peak Width: 18" x 18" outside dimension, 16" x 16" inside dimension Thickness: 2" edge, 5" at peak Box Quantity: 1 piece Installation: NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap.  Column Wraps are sold separately. Application: To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Buff Sandstone Flush Mount Outside Corner is designed for a clean, finished look on exterior wall edges. Each piece measures 48 inches long with a 3" x 3" profile. With two per box, you’ll get eight linear feet of coverage. It’s a practical match for NextStone panels, though it can also be used on its own as a tidy trim solution where a full corner isn’t needed. The interlocking design eliminates the need for caulk or paint, helping speed up installation while keeping the result neat. It’s lightweight, easy to handle, and built for vertical use only. Style:  Sandstone Flush Mount Outside Corner Colour: Buff Texture: Rough texture Width: 48" long Thickness: 3" x 3" Box Quantity: 2 pieces per box (8 linear feet per box) Coverage: 48" per piece Installation: NextStone Sandstone Sandstone Flush Mount Outside Corner can also be used as a general finished termination trim piece. To terminate the outside corner ofa NextStone flat panel in place of outside corners. NextStone's patented interlocking accessory design does not require caulk or paint. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Buff Sandstone Ledger / Sill Inside Corner is made to connect two ledger walls cleanly at any angle. Each piece measures 9.75 inches by 7.625 inches and stands 2.5 inches tall. You get two in each box. This corner piece continues the ledger line without the need for mitering. It fits using NextStone’s interlocking system, which means no caulk, paint, or extra tools. It’s a practical solution when transitioning between panelled walls and surfaces like brick, siding, or stucco. Lightweight and strong, its design is for vertical use only. Style:  Sandstone Ledger / Sill Inside Corner Colour: Buff Texture: Rough texture, rock faced Height: 2 1/2" Width: 9 3/4" x 7 5/8" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: inside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Inside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Buff Sandstone Ledger / Sill Outside Corner is built to wrap your top row of panels cleanly around external corners. Each piece measures 6.25 inches by 4.25 inches and stands 2.5 inches high. Two pieces are included per box. The corner piece connects easily with the full ledger system, helping you avoid miter cuts and keeping the install straightforward. It’s ideal when transitioning from stone to other materials like brick, siding, or stucco. The interlocking design means no need for paint or caulking. Made for vertical surfaces only, it’s lightweight, durable, and easy to handle on-site. A great choice when clean lines are the priority. Style:  Sandstone Ledger / Sill Outside Corner Colour: Buff Texture: Rough texture, rock faced Height: 2 1/2" Width: 6 1/4" x 4 1/4" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: Outside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Outside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Buff Sandstone Window and Door Trim offers a clean, reliable finish for framing windows and doors, or as a general trim solution where a full outside corner isn’t needed. Each piece is 48 inches long, 2.25 inches thick, and 3.5 inches deep. With four in the box, you get 16 linear feet of coverage. It’s made to pair with NextStone panels and uses a simple interlocking design that removes the need for any caulk or paint. The trim is lightweight, durable, and easy to use on vertical surfaces. The buff tone has a soft, natural look. Please note that the color may vary slightly depending on lighting or screen settings. Style:  Sandstone Window and Door Trim Colour: Buff Texture: Rough texture Width: 48" long Thickness: 2 1/4" x 3 1/2" Box Quantity: 4 pieces per box (16 linear feet per box) Coverage: 48" per piece Installation: NextStone Sandstone Sandstone WIndow and Door Trim can also be used as a general finished termination trim piece. To terminate the outside corner of a NextStone flat panel in place of outside corners. NextStone's patented interlocking accessory design does not require caulk or paint. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Charcoal Sandstone Flush Mount Outside Corner is built to finish exterior wall edges cleanly. Each piece measures 48 inches in length with a 3" x 3" profile, and the box includes two, giving you eight linear feet of coverage. It pairs perfectly with NextStone panels, but it can also be used as a neat trim piece when a full corner isn’t required. The interlocking design means no need for caulking or paint. Installation is straightforward, and the finished look is consistently sharp across projects. These corners are made for vertical surfaces only. The charcoal works well with most colour schemes. Style:  Sandstone Flush Mount Outside Corner Colour: Charcoal Texture: Rough texture Width: 48" long Thickness: 3" x 3" Box Quantity: 2 pieces per box (8 linear feet per box) Coverage: 48" per piece Installation: NextStone Sandstone Sandstone Flush Mount Outside Corner can also be used as a general finished termination trim piece. To terminate the outside corner of a NextStone flat panel in place of outside corners in a coordinating colour that will work with other adjacent building materials. NextStone's patented interlocking accessory design does not require caulk or paint. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Charcoal Sandstone Ledger / Still Inside Corner helps you create a sharp, clean finish when your panel system meets an interior corner. Each piece measures 9.75 inches by 7.625 inches and stands 2.5 inches high. You get two in the box. This inside corner piece connects with the main ledger to continue the look without the need for miter cuts. It’s made for neat transitions between panelled sections and other materials like brick, siding, or stucco. The patented interlocking system clicks in without any caulking or paint. Durable and lightweight, it’s easy to install on vertical surfaces. Style:  Sandstone Ledger / Sill Inside Corner Colour: Charcoal Texture: Rough texture, rock faced Height: 2 1/2" Width: 9 3/4" x 7 5/8" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: inside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Inside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.