Onyx

Product Description   The Onyx Slatestone Flat Panel gives your wall the look of real stacked stone without any of the weight or mess. The panels interlock and fasten directly to the wall using a starter strip which you can purchase separately. All you need to do is line them up and fasten them with screws. They then sit tightly on the wall, making it easy to keep things straight as you build. No special tools are needed and there is no mortar or messy prep. The onyx colour brings out a dark, textured look that really stands out against walls or trim.    Style:  Slatestone Flat Panel Colour: Onyx Accessory Colour: Onyx Texture: Dry stacked stone look Height: 15 1/2" Width: 43" Thickness: 1 3/4" Box Quantity: 4 pieces Coverage: 16.4 square feet per box Installation: 4 foot metal starter strip is used to begin first row of NextStone panels. Application: Vertical surfaces only. Not suitable for floor applications. How to Calculate flats only: 1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.

Product Description: The Onyx Slatestone 41” Post Cover gives you a fast and clean way to add a stone look to your desk or basement posts. It comes in two pieces that fit together around a wood post and stay secure with adhesive and screws. This style works with 4” or 6” posts. If you’re wrapping a 4” post, you’ll need a converter kit. The dry-stacked finish gives it a solid, realistic texture, and the dark onyx shade contrasts with lighter panels. Each box includes one full wrap. Post caps are sold separately to complete the look. Style:  Slatestone 41" Post Cover Colour: Onyx Accessory Colour: Onyx Texture: Dry stacked stone look Height: 41" Width: Outside dimensions: 8" x 8", Inside dimensions: 5 1/2" x 5 1/2" Thickness: 1 3/4" Box Quantity: 2 pieces Coverage: 41" high (for 4 or 6 inch wood post)  Installation: To cover a 4 or 6-inch wood post. Instructions are available in each box.  Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Onyx Sandstone Ledger is designed to finish the top edge of your NextStone panel installation with a clean, sloped profile. It works well where you’re breaking up the transition to brick, siding, or stucco, and the rough stone texture adds character without drawing too much attention. The Onyx colour is dark and versatile, making it a good choice for most builds. Each piece measures 48 inches long, 4 inches deep, and 2.5 inches high. You’ll get four per box, covering 16 linear feet in total. It’s lightweight but strong, making it easy to fit into place. The interlocking system lines everything up neatly. These are made for vertical surfaces only. Style:  Sandstone Ledger / Sill Colour: Onyx Texture: Rough texture, rock faced Height: 2 1/2" Width: 48" long Thickness: 4" deep Box Quantity: 4 pieces per box (16 linear feet per box) Coverage: 48"per piece Installation: To terminate the top row of NextStone flat panels. NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: NextStone Metal starter strips are four feet in length. They are to be used to begin the first row of NextStone panels. The starter strip allows the panels to lock in without having to screw through the front of the panel creating blemishes. Starter Strips are installed approximately 2 1/2" above grade. Starter Strips are angled to fit NextStone panels snuggly. They can easily be cut.  Style:  NextStone Metal Starter Strip Height: 2" Width: 48" Thickness: 1/4" Installation: Screw-on Application: Four foot metal starter strip is used to begin first row of NextStone panels. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Onyx 18" Column Cover Cap is a clean way to finish your column wraps. It has a rough stone texture and a peaked top, designed to sit firmly on top of a 30" Country Ledgestone or Slatestone Column Wrap. The dark onyx colour brings a solid, bold finish to any setup.  It fits columns with a 16" x 16" top and measures 18" x 18" on the outside. One cap per box. Installing it is straightforward. Just apply polyurethane adhesive to press it into place. Column wraps are sold separately. Style:  18" Column Wrap Cap Colour: Onyx Texture: Rough texture Height: 5" at peak Width: 18" x 18" outside dimension, 16" x 16" inside dimension Thickness: 2" edge, 5" at peak Box Quantity: 1 piece Installation: NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap.  Column Wraps are sold separately. Application: To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Onyx Sandstone Window and Door Trim is designed to give your building projects a sharp, defined finish around windows, doors, or along wall edges. Each piece is 48 inches long, 2.25 inches thick, and 3.5 inches deep. With four in each box, you’ll have 16 linear feet ready to install. This trim works well with NextStone panels but also looks great on its own, as well as wherever a finished edge is needed. The interlocking design keeps things simple. No paint or caulk. Just a strong, solid fit. Built for vertical use only. The deep onyx tone adds contrast and depth, though actual color may vary depending on lighting and screen differences. Style:  Sandstone Window and Door Trim Colour: Onyx Texture: Rough texture Width: 48" long Thickness: 2 1/4" x 3 1/2" Box Quantity: 4 pieces per box (16 linear feet per box) Coverage: 48" per piece Installation: NextStone Sandstone Sandstone WIndow and Door Trim can also be used as a general finished termination trim piece. To terminate the outside corner of a NextStone flat panel in place of outside corners. NextStone's patented interlocking accessory design does not require caulk or paint. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Onyx 10" Post Cover Cap adds a clean finish to your NextStone post wraps. It has a rough texture with a peaked top and a deep charcoal colour that works well with both light and dark tones. Each cap measures 10.5” x 10.5” on the outside and fits perfectly over an 8” x 8” post. The edge height is 1.5 inches, rising to 3 inches at the peak. This cap is made to fit over the 47” Country Ledgestone or 41” Slatestone Post Covers. Comes with one per box. Installation is simple using polyurethane adhesive. Just line it up and press it down. Style:  10" Post Cover Cap Colour: Onyx Texture: Rough texture Height: 3" at peak Width: 10 1/2" x 10 1/2" outside dimension, 8" x 8" inside dimension Thickness: 1 1/2" edge, 3" at peak Box Quantity: 1 piece Installation: NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers.  Post Covers are sold separately. Application: To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Onyx Slatestone 30” Column Wrap gives existing posts a finished stone look without any hassle of real masonry. Each set includes four interlocking pieces that fit together using a patented groove system, which creates a solid wrap around your column.  It’s designed to go over a box or post, not to stand on its own. The finished dimensions are 16” x 16” on the outside and just under 14” inside. Each wrap covers 30 inches in height and has a 1¾” thick profile. Works with matching 18” caps, which are sold separately. Columns must be in place before wrapping. Note: This is NOT a stand-alone product. There must be a box to attach to. Style:  Slatestone 30" Column Wrap Colour: Onyx Accessory Colour: Onyx Texture: Dry stacked stone look Height: 30" Width: Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8" Thickness: 1 3/4" Box Quantity: 4 pieces Coverage: 30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8") Installation: This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Onyx Sandstone Flush Mount Outside Corner gives a clean, polished edge to your exterior wall finish. Each piece measures 48 inches in length with a 3” x 3” profile, and each box includes two, providing eight linear feet of coverage. It fits easily with NextStone panels but also works well as a standalone trim when a full outside corner isn’t needed. The interlocking design means there’s no need for paint or caulk, which makes installation quick and tidy. Designed for vertical use only. The onyx tone brings a bold, darker contrast that suits modern or traditional finishes. As with all colors, slight variation may occur depending on light or screen settings. Style:  Sandstone Flush Mount Outside Corner Colour: Onyx Texture: Rough texture Width: 48" long Thickness: 3" x 3" Box Quantity: 2 pieces per box (8 linear feet per box) Coverage: 48" per piece Installation: NextStone Sandstone Sandstone Flush Mount Outside Corner can also be used as a general finished termination trim piece. To terminate the outside corner ofa NextStone flat panel in place of outside corners. NextStone's patented interlocking accessory design does not require caulk or paint. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Transform your space with NextStone Slatestone Onyx stone panels. Lightweight, durable, and realistic-looking. Order a sample to preview the texture and colour before installing your full panel system and receive a $20 credit towards your next purchase. E-mail orderdesk@nextstonecanada.com for your promo code.

Product Description: The Onyx Slatestone Outside Corner is made to finish exterior wall edges where two faces meet. The interlocking design keeps things tight and tidy, and the corners can be screwed straight into place without much prep. Each box includes four corners, two left, and two right, which helps keep your layout balanced. No paint, grout, or sealant needed. Once it’s up, it stays put. The dark onyx shade works well with both modern and rustic siding. It’s a clean, crisp finish that ties the whole wall together. Style:  Slatestone Outside Corner Colour: Onyx Accessory Colour: Onyx Texture: Dry stacked stone look Height: 15 1/2" Width: 11.5" x 7 1/4" Thickness: 1 3/4" Box Quantity: 4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners) Coverage: 5.17 linear feet per box (approx. 5 sqft of flat area) Installation: 4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.  Application: Vertical surfaces only. Not suitable for floor applications. How to Calculate flats and corners: 1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.

Perform perfect touch-ups with product-specific paint kits. Each kit contains 3 bottles. 1 base colour 1 accent colour 1 trim colour  

Product Description: The Onyx Sandstone Ledger / Sill Outside Corner lets you carry the top edge of your panel system easily around external corners. Each piece measures 6.25 inches by 4.25 inches and stands 2.5 inches high. Solid in boxes of two. The corner piece connects with the main ledger to create a clean wraparound finish without miter cuts. It’s ideal for transitions between stone panels and materials like brick, siding, or stucco. Like the rest of the system, it uses a patented interlocking design that requires no caulking or painting. Made for vertical surfaces only. It's lightweight, durable, and easy to install wherever a solid corner finish is needed. Style:  Sandstone Ledger / Sill Outside Corner Colour: Onyx Texture: Rough texture, rock faced Height: 2 1/2" Width: 6 1/4" x 4 1/4" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: Outside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Outside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Onyx Sandstone Ledger / Sill Inside Corner is made to keep inside corners looking clean. Each piece measures 9.75 inches and stands 2.5 inches tall. Solid in a box of two. It pairs with the standard Sandstone Ledger to create a nice inside turn, without the need for any mitering. The interlocking design removes any need for caulking or painting. Installation is quick, and the final result is tidy and solid. The Onyx finish matches well with different panel colours. It is strong, lightweight, and made for vertical surfaces only. Style:  Sandstone Ledger / Sill Inside Corner Colour: Onyx Texture: Rough texture, rock faced Height: 2 1/2" Width: 9 3/4" x 7 5/8" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: inside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Inside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.