Pewter

Product Description: NextStone Metal starter strips are four feet in length. They are to be used to begin the first row of NextStone panels. The starter strip allows the panels to lock in without having to screw through the front of the panel creating blemishes. Starter Strips are installed approximately 2 1/2" above grade. Starter Strips are angled to fit NextStone panels snuggly. They can easily be cut.  Style:  NextStone Metal Starter Strip Height: 2" Width: 48" Thickness: 1/4" Installation: Screw-on Application: Four foot metal starter strip is used to begin first row of NextStone panels. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Gray 18 inch Column Cover Cap is made to top off your NextStone Column Wrap with a finished look. It has a natural stone texture and a peaked profile, which gives columns a solid and professional appearance. The grey shade works well in modern and traditional settings. Each cap measures 18 inches across on the outside and 16 inches inside, fitting neatly over 30 inch Country Ledgestone or Slatestone Column Wraps. Installing them is quick and easy with polyurethane adhesive, with no cutting or painting. Once set, it holds in place and won’t move. Style:  18" Column Wrap Cap Colour: Gray Texture: Rough texture Height: 5" at peak Width: 18" x 18" outside dimension, 16" x 16" inside dimension Thickness: 2" edge, 5" at peak Box Quantity: 1 piece Installation: NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap.  Column Wraps are sold separately. Application: To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Gray Sandstone Window and Door Trime offers a simple way to frame windows, doors, or wall ends with a smooth and finished edge. Each piece is 48 inches long, 2.25 inches thick, and 3.5 inches deep. With four in every box, you get a total of 16 linear feet to work with. It fits neatly alongside NextStone panels or can be used on its own where a clean trim is required. The interlocking design makes installation straightforward. No paint or caulk needed. This product is made for vertical surfaces only. The gray tone blends easily with other finishes, though minor color variation is always possible depending on light and screen settings. Style:  Sandstone Window and Door Trim Colour: Gray Texture: Rough texture Width: 48" long Thickness: 2 1/4" x 3 1/2" Box Quantity: 4 pieces per box (16 linear feet per box) Coverage: 48" per piece Installation: NextStone Sandstone Sandstone WIndow and Door Trim can also be used as a general finished termination trim piece. To terminate the outside corner of a NextStone flat panel in place of outside corners. NextStone's patented interlocking accessory design does not require caulk or paint. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Gray Sandstone Ledger gives you a lovely finish where your flat panels stop. Its sloped design helps shed water and transitions neatly to brick, siding, or stucco. Each piece is 48 inches long, 4 inches deep, and 2.5 inches high. You get four in a box, covering 16 linear feet. The rough, rock-faced texture adds just enough detail without overdoing it. Installation is easy. The interlocking system clicks into place without the need for painting or caulking. It's lightweight but strong, and the corner pieces are available separately. Style:  Sandstone Ledger / Sill Colour: Gray Texture: Rough texture, rock faced Height: 2 1/2" Width: 48" long Thickness: 4" deep Box Quantity: 4 pieces per box (16 linear feet per box) Coverage: 48"per piece Installation: To terminate the top row of NextStone flat panels. NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Gray 10” Post Cover Cap sits on your NextStone post wraps. It has a rough texture and a peaked shape that gives each post a finished look. The colour is easy to match with most styles.  Each cap has an outer size of 10” x 10” and fits neatly over an 8” x 8” post. The edge height is 1.5 inches, rising to 3 inches at the peak. It’s made to fit over the 47” Country Ledgestone or 41” Slatestone Post Covers. There is one cap per box. Attach it with polyurethane adhesive and press it into place. Style:  10" Post Cover Cap Colour: Gray Texture: Rough texture Height: 3" at peak Width: 10" x 10" outside dimension, 8" x 8" inside dimension Thickness: 1 1/2" edge, 3" at peak Box Quantity: 1 piece Installation: NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers.  Post Covers are sold separately. Application: To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description   The Pewter Slatestone Flat Panel gives your wall the look of real stacked stone without any of the weight or mess. The panels interlock and fasten directly to the wall using a starter strip which you can purchase separately. All you need to do is line them up and fasten them with screws. They then sit tightly on the wall, making it easy to keep things straight as you build. No special tools are needed and there is no mortar or messy prep. A subtle grey is imbued deep tan colors to provide a dashing look to your exterior or interior projects.   Style:  Slatestone Flat Panel Colour: Pewter Accessory Colour: Gray Texture: Dry stacked stone look Height: 15 1/2" Width: 43" Thickness: 1 3/4" Box Quantity: 4 pieces Coverage: 16.4 square feet per box Installation: 4 foot metal starter strip is used to begin first row of NextStone panels. Application: Vertical surfaces only. Not suitable for floor applications. How to Calculate flats only: 1. Measure and record the height and width of the wall. 2. Then multiply the total height by the width in inches, and divide that number by 144. Subtract doors and windows where you will not be installing. You will want to add 5 – 10% to this number for waste. This is the total number of square feet needed for the job. 3. Divide the total square feet needed by the square foot per box for the product you plan to purchase and round up to the next full box to order. If you need corners, follow the extra steps below. Example: 100” x 60” = 6,000” ÷ 144 = 41.66 square feet X 1.10 = 45.82 (Each box covers approx.16 square feet) 45.82 ÷ 16 = 2.86 Order 3 boxes of flats Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.

Product Description: The Pewter Slatestone Outside Corner is made to finish exterior wall edges where two faces meet. The interlocking design keeps things tight and tidy, and the corners can be screwed straight into place without much prep. Each box includes four corners, two left, and two right, which helps keep your layout balanced. No paint, grout, or sealant needed. Once it’s up, it stays put. The natural Pewter shade works well with both modern and rustic siding. It’s a clean, crisp finish that ties the whole wall together. Style:  Slatestone Outside Corner Colour: Pewter Accessory Colour: Gray Texture: Dry stacked stone look Height: 15 1/2" Width: 11.5" x 7 1/4" Thickness: 1 3/4" Box Quantity: 4 pieces, 2 left and 2 right (numbered backs 1 and 3 are Left corners, 2 and 4 are Right corners) Coverage: 5.17 linear feet per box (approx. 5 sqft of flat area) Installation: 4 foot metal starter strip is used to begin first row of NextStone panels. Corners install with screws and have a patented interlock design that hides all screw fasteners.  Application: Vertical surfaces only. Not suitable for floor applications. How to Calculate flats and corners: 1. Measure the height of all 90-degree outside corners in inches and divide by 12. This is the total number of linear feet needed for the job. 2. Divide the total linear feet needed by the linear foot per box for the product you plan to purchase and round up to the next full box to order. Example: 192” ÷ 12 = 16 linear feet (each box covers 5.17 linear feet) 16 ÷ 5.17 = 3.09 Order 3 boxes of corners 3. Some of the flat areas will be covered by the corner pieces so that you can subtract the square footage needed for the flats. The approximate square foot coverage per box is 5 square feet. You can now subtract 5 square feet by the number of boxes purchased and subtract this total from the overall square feet required for your project. Always round up to the next box. Now using the example above to calculate total square foot, adjust the number of boxes needed for flats. 45.82 square feet subtract 15 (this number is the total linear feet in 3 boxes of corners) = 30.82 ÷ 16 = 1.92 Order 2 boxes of flats Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product. NextStone reserves the right to delete or change items in its product line without notice, sizes shown are approximate, coverage area could vary.

Product Description: The Pewter Slatestone 41” Post Cover gives you a fast and clean way to add a stone look to your desk or basement posts. It comes in two pieces that fit together around a wood post and stay secure with adhesive and screws. This style works with 4” or 6” posts. If you’re wrapping a 4” post, you’ll need a converter kit. The dry-stacked finish gives it a solid, realistic texture, and the dark onyx shade contrasts with lighter panels. Each box includes one full wrap. Post caps are sold separately to complete the look. Style:  Slatestone 41" Post Cover Colour: Pewter Accessory Colour: Gray Texture: Dry stacked stone look Height: 41" Width: Outside dimensions: 8" x 8", Inside dimensions: 5 1/2" x 5 1/2" Thickness: 1 3/4" Box Quantity: 2 pieces Coverage: 41" high (for 4 or 6 inch wood post)  Installation: To cover a 4 or 6-inch wood post. Instructions are available in each box.  Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Pewter Slatestone 30” Column Wrap gives existing posts a finished stone look without any hassle of real masonry. Each set includes four interlocking pieces that fit together using a patented groove system, which creates a solid wrap around your column.  It’s designed to go over a box or post, not to stand on its own. The finished dimensions are 16” x 16” on the outside and just under 14” inside. Each wrap covers 30 inches in height and has a 1¾” thick profile. Works with matching 18” caps, which are sold separately. Columns must be in place before wrapping. Note: This is NOT a stand-alone product. There must be a box to attach to. Style:  Slatestone 30" Column Wrap Colour: Pewter Accessory Colour: Gray Texture: Dry stacked stone look Height: 30" Width: Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8" Thickness: 1 3/4" Box Quantity: 4 pieces Coverage: 30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8") Installation: This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Gray Sandstone Leger / Sill Outside Corner is built to continue the top edge of your panel system around external corners without the need for miter cuts. Each piece measures 6.25 inches by 4.25 inches and stands 2.5 inches high. Two pieces are included per box. This component ties into the rest of the ledger system, which gives a clean, finished look while transitioning to brick, siding, or stucco. It uses the same interlocking design found across the range, so there’s no need to paint or caulk.  Made for vertical surfaces only, this corner piece is lightweight, durable, and straightforward to install on-site. Style:  Sandstone Ledger / Sill Outside Corner Colour: Gray Texture: Rough texture, rock faced Height: 2 1/2" Width: 6 1/4" x 4 1/4" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: Outside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Outside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Grey Sandstone Ledger / Sill Inside Corner is built to make inside turns look clean and sharp. Each piece measures 9.75 inches by 7.625 inches and stands 2.5 inches tall. Sold in boxes of two. It continues your ledger installation neatly around corners without any hassle of mitering. The interlocking design clicks into place with no caulking or painting required. It's easy to secure in place. Perfect for projects where stone meets siding, stucco, or brick. Durable, lightweight, and made for vertical walls. Simple to install. Style:  Sandstone Ledger / Sill Inside Corner Colour: Gray Texture: Rough texture, rock faced Height: 2 1/2" Width: 9 3/4" x 7 5/8" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: inside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Inside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Gray Sandstone Flush Mount Outside Corner is a simple way to finish a clean exterior wall edge. Each piece is 48 inches long with a 3” x 3” profile. Two pieces per box give you eight linear feet of coverage.  It’s made to fit neatly with NextStone panels and can be used as a trim piece when a full outside corner isn’t needed. The interlocking design means theres no need for caulking or painting. Installation is quick, and the end results hold up well. This piece is for vertical use only. The gray tone works across a wide range of finishes, though colors may vary slightly in person. Style:  Sandstone Flush Mount Outside Corner Colour: Gray Texture: Rough texture Width: 48" long Thickness: 3" x 3" Box Quantity: 2 pieces per box (8 linear feet per box) Coverage: 48" per piece Installation: NextStone Sandstone Sandstone Flush Mount Outside Corner can also be used as a general finished termination trim piece. To terminate the outside corner ofa NextStone flat panel in place of outside corners. NextStone's patented interlocking accessory design does not require caulk or paint. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.