NextStone Accessories

Product Description: The Buff Sandstone Window and Door Trim offers a clean, reliable finish for framing windows and doors, or as a general trim solution where a full outside corner isn’t needed. Each piece is 48 inches long, 2.25 inches thick, and 3.5 inches deep. With four in the box, you get 16 linear feet of coverage. It’s made to pair with NextStone panels and uses a simple interlocking design that removes the need for any caulk or paint. The trim is lightweight, durable, and easy to use on vertical surfaces. The buff tone has a soft, natural look. Please note that the color may vary slightly depending on lighting or screen settings. Style:  Sandstone Window and Door Trim Colour: Buff Texture: Rough texture Width: 48" long Thickness: 2 1/4" x 3 1/2" Box Quantity: 4 pieces per box (16 linear feet per box) Coverage: 48" per piece Installation: NextStone Sandstone Sandstone WIndow and Door Trim can also be used as a general finished termination trim piece. To terminate the outside corner of a NextStone flat panel in place of outside corners. NextStone's patented interlocking accessory design does not require caulk or paint. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Charcoal Sandstone Ledger / Sill Outside Corner finishes off the top row of panels as it wraps around external corners. Each piece measures 6.25 inches by 4.25 inches and stands 2.5 inches high. You get two inside the box. It’s made to continue the look of your ledger while avoiding miter cuts. Use it to create a clean transition from NextStone panels to other finishes like brick, siding, and stucco. The interlocking design means installation is simple, with no need for paint or caulking. Built from lightweight, durable materials, this corner piece is easy to handle and holds up well once installed. Suitable for vertical surfaces only. Style:  Sandstone Ledger / Sill Outside Corner Colour: Charcoal Texture: Rough texture, rock faced Height: 2 1/2" Width: 6 1/4" x 4 1/4" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: Outside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Outside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Buff Sandstone Ledger / Sill Outside Corner is built to wrap your top row of panels cleanly around external corners. Each piece measures 6.25 inches by 4.25 inches and stands 2.5 inches high. Two pieces are included per box. The corner piece connects easily with the full ledger system, helping you avoid miter cuts and keeping the install straightforward. It’s ideal when transitioning from stone to other materials like brick, siding, or stucco. The interlocking design means no need for paint or caulking. Made for vertical surfaces only, it’s lightweight, durable, and easy to handle on-site. A great choice when clean lines are the priority. Style:  Sandstone Ledger / Sill Outside Corner Colour: Buff Texture: Rough texture, rock faced Height: 2 1/2" Width: 6 1/4" x 4 1/4" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: Outside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Outside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Brown Sandstone Ledger / Sill Outside Corner has been made to finish off the top row of stone panels that wrap around an exterior corner. Each piece measures 6.25 inches by 4.25 inches and stands 2.5 inches high. Two pieces come in each box. It's a simple way to avoid miter cuts while maintaining a consistent look around corners. This piece continues the ledger line cleanly and helps transition to brick, siding, or stucco. It uses the same interlocking design as the rest of the system. Lightweight and durable, it’s easy to install and made for vertical use only. Style:  Sandstone Ledger / Sill Outside Corner Colour: Brown Texture: Rough texture, rock faced Height: 2 1/2" Width: 6 1/4" x 4 1/4" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: Outside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Outside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Gray Sandstone Leger / Sill Outside Corner is built to continue the top edge of your panel system around external corners without the need for miter cuts. Each piece measures 6.25 inches by 4.25 inches and stands 2.5 inches high. Two pieces are included per box. This component ties into the rest of the ledger system, which gives a clean, finished look while transitioning to brick, siding, or stucco. It uses the same interlocking design found across the range, so there’s no need to paint or caulk.  Made for vertical surfaces only, this corner piece is lightweight, durable, and straightforward to install on-site. Style:  Sandstone Ledger / Sill Outside Corner Colour: Gray Texture: Rough texture, rock faced Height: 2 1/2" Width: 6 1/4" x 4 1/4" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: Outside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Outside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Onyx Sandstone Ledger / Sill Outside Corner lets you carry the top edge of your panel system easily around external corners. Each piece measures 6.25 inches by 4.25 inches and stands 2.5 inches high. Solid in boxes of two. The corner piece connects with the main ledger to create a clean wraparound finish without miter cuts. It’s ideal for transitions between stone panels and materials like brick, siding, or stucco. Like the rest of the system, it uses a patented interlocking design that requires no caulking or painting. Made for vertical surfaces only. It's lightweight, durable, and easy to install wherever a solid corner finish is needed. Style:  Sandstone Ledger / Sill Outside Corner Colour: Onyx Texture: Rough texture, rock faced Height: 2 1/2" Width: 6 1/4" x 4 1/4" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: Outside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Outside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Charcoal Sandstone Ledger / Still Inside Corner helps you create a sharp, clean finish when your panel system meets an interior corner. Each piece measures 9.75 inches by 7.625 inches and stands 2.5 inches high. You get two in the box. This inside corner piece connects with the main ledger to continue the look without the need for miter cuts. It’s made for neat transitions between panelled sections and other materials like brick, siding, or stucco. The patented interlocking system clicks in without any caulking or paint. Durable and lightweight, it’s easy to install on vertical surfaces. Style:  Sandstone Ledger / Sill Inside Corner Colour: Charcoal Texture: Rough texture, rock faced Height: 2 1/2" Width: 9 3/4" x 7 5/8" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: inside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Inside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Buff Sandstone Ledger / Sill Inside Corner is made to connect two ledger walls cleanly at any angle. Each piece measures 9.75 inches by 7.625 inches and stands 2.5 inches tall. You get two in each box. This corner piece continues the ledger line without the need for mitering. It fits using NextStone’s interlocking system, which means no caulk, paint, or extra tools. It’s a practical solution when transitioning between panelled walls and surfaces like brick, siding, or stucco. Lightweight and strong, its design is for vertical use only. Style:  Sandstone Ledger / Sill Inside Corner Colour: Buff Texture: Rough texture, rock faced Height: 2 1/2" Width: 9 3/4" x 7 5/8" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: inside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Inside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Brown Sandstone Ledger / Sill Insider Corner gives your ledger install a clean, finished look where two panelled walls meet at an inside angle. Each piece measures 9.75 inches by 7.625 inches and is 2.5 inches high. You get two in each box. This corner piece connects without the need to cut angles. It uses NextStone’s interlocking design. This means no caulk or paint is needed. It works especially well when transitioning between stone panels and other exterior materials like siding, brick, or stucco.  Built for use with vertical walls only. It's lightweight, solid, and ready to fit straight into your project. Style:  Sandstone Ledger / Sill Inside Corner Colour: Brown Texture: Rough texture, rock faced Height: 2 1/2" Width: 9 3/4" x 7 5/8" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: inside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Inside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Grey Sandstone Ledger / Sill Inside Corner is built to make inside turns look clean and sharp. Each piece measures 9.75 inches by 7.625 inches and stands 2.5 inches tall. Sold in boxes of two. It continues your ledger installation neatly around corners without any hassle of mitering. The interlocking design clicks into place with no caulking or painting required. It's easy to secure in place. Perfect for projects where stone meets siding, stucco, or brick. Durable, lightweight, and made for vertical walls. Simple to install. Style:  Sandstone Ledger / Sill Inside Corner Colour: Gray Texture: Rough texture, rock faced Height: 2 1/2" Width: 9 3/4" x 7 5/8" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: inside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Inside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Onyx Sandstone Ledger / Sill Inside Corner is made to keep inside corners looking clean. Each piece measures 9.75 inches and stands 2.5 inches tall. Solid in a box of two. It pairs with the standard Sandstone Ledger to create a nice inside turn, without the need for any mitering. The interlocking design removes any need for caulking or painting. Installation is quick, and the final result is tidy and solid. The Onyx finish matches well with different panel colours. It is strong, lightweight, and made for vertical surfaces only. Style:  Sandstone Ledger / Sill Inside Corner Colour: Onyx Texture: Rough texture, rock faced Height: 2 1/2" Width: 9 3/4" x 7 5/8" Thickness: 4" deep Box Quantity: 2 pieces per box Coverage: inside corner of Ledger / Sill Installation: When installing Sandstone Ledger, the Inside Corner piece is used to continue the Sandstone Ledger to prevent mitering.  NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Charcoal Sandstone Ledger is created to give your panel installation a clean, finished top edge. Each piece is 48 inches long, 4 inches deep, and 2.5 inches high. You get four in a box, covering a total of 16 linear feet. It’s the perfect way to transition from stone panels to brick, siding, or stucco. The interlocking design fits in cleanly without using any caulk or paint. Once in place, it gives a solid, consistent finish across the build. The charcoal colour works well with a wide range of panel shades. These ledgers are for vertical surfaces only. Corner pieces sold separately. Style:  Sandstone Ledger / Sill Colour: Charcoal Texture: Rough texture, rock faced Height: 2 1/2" Width: 48" long Thickness: 4" deep Box Quantity: 4 pieces per box (16 linear feet per box) Coverage: 48" per piece Installation: To terminate the top row of NextStone flat panels. NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Buff Sandstone Ledger is shaped with a subtle slope to help the water run off and finish off the top row of panels with a clean line. It’s made to pair with brick, siding, or stucco, and gives that top edge a nice transition. Each piece is 48 inches long, 4 inches deep, and 2.5 inches high. You get four in a box, which covers 16 linear feet. The surface has a rough, rock-faced texture that ties in nicely with the rest of the panel system. It is installed with a simple interlock, so no caulking or painting is needed. These ledgers are lightweight, strong, and built for vertical surfaces only. Matching inside and outside corners are sold separately. Style:  Sandstone Ledger / Sill Colour: Buff Texture: Rough texture, rock faced Height: 2 1/2" Width: 48" long Thickness: 4" deep Box Quantity: 4 pieces per box (16 linear feet per box) Coverage: 48"per piece Installation: To terminate the top row of NextStone flat panels. NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Brown Sandstone Ledger is made to finish off the top row of flat panels. Its sloped design helps water run off and gives a clean edge when switching to brick, siding, or stucco. It has a rough, rock-faced texture and a solid look while still being lightweight. Each piece measures 48 inches long, 4 inches deep, and 2.5 inches high. You get four in a box, covering 16 linear feet in total. Like all NextStone accessories, it uses an interlocking design. That means no need for caulking or paint, and the final result looks great each time. This ledge is for vertical use only. Corner pieces are sold separately. Style:  Sandstone Ledger / Sill Colour: Brown Texture: Rough texture, rock faced Height: 2 1/2" Width: 48" long Thickness: 4" deep Box Quantity: 4 pieces per box (16 linear feet per box) Coverage: 48"per piece Installation: To terminate the top row of NextStone flat panels. NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Gray Sandstone Ledger gives you a lovely finish where your flat panels stop. Its sloped design helps shed water and transitions neatly to brick, siding, or stucco. Each piece is 48 inches long, 4 inches deep, and 2.5 inches high. You get four in a box, covering 16 linear feet. The rough, rock-faced texture adds just enough detail without overdoing it. Installation is easy. The interlocking system clicks into place without the need for painting or caulking. It's lightweight but strong, and the corner pieces are available separately. Style:  Sandstone Ledger / Sill Colour: Gray Texture: Rough texture, rock faced Height: 2 1/2" Width: 48" long Thickness: 4" deep Box Quantity: 4 pieces per box (16 linear feet per box) Coverage: 48"per piece Installation: To terminate the top row of NextStone flat panels. NextStone's patented interlocking accessory design does not require caulk or paint. Inside and Outside Ledger corner pieces sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Charcoal 18 inch Column Cover Cap is made to top off your NextStone Column Wrap with a solid finished look. It has a rough stone texture and a peaked centre, giving your post a clean finish without looking too polished. The charcoal colour blends well with both light and dark wraps. Each cap has an outer dimension of 18” x 18”, with a 16” x 16” interior to fit over a 30 inch NextStone Country Ledgestone or Slatestone Column Wrap. The edge height is 2 inches, rising to 5 inches at the peak. There is one cap in each box. Installing these is easy. Just use a polyurethane adhesive to fix it on top. Style:  18" Column Wrap Cap Colour: Charcoal Texture: Rough texture Height: 5" at peak Width: 18" x 18" outside dimension, 16" x 16" inside dimension Thickness: 2" edge, 5" at peak Box Quantity: 1 piece Installation: NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap.  Column Wraps are sold separately. Application: To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Gray 18 inch Column Cover Cap is made to top off your NextStone Column Wrap with a finished look. It has a natural stone texture and a peaked profile, which gives columns a solid and professional appearance. The grey shade works well in modern and traditional settings. Each cap measures 18 inches across on the outside and 16 inches inside, fitting neatly over 30 inch Country Ledgestone or Slatestone Column Wraps. Installing them is quick and easy with polyurethane adhesive, with no cutting or painting. Once set, it holds in place and won’t move. Style:  18" Column Wrap Cap Colour: Gray Texture: Rough texture Height: 5" at peak Width: 18" x 18" outside dimension, 16" x 16" inside dimension Thickness: 2" edge, 5" at peak Box Quantity: 1 piece Installation: NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap.  Column Wraps are sold separately. Application: To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Onyx 18" Column Cover Cap is a clean way to finish your column wraps. It has a rough stone texture and a peaked top, designed to sit firmly on top of a 30" Country Ledgestone or Slatestone Column Wrap. The dark onyx colour brings a solid, bold finish to any setup.  It fits columns with a 16" x 16" top and measures 18" x 18" on the outside. One cap per box. Installing it is straightforward. Just apply polyurethane adhesive to press it into place. Column wraps are sold separately. Style:  18" Column Wrap Cap Colour: Onyx Texture: Rough texture Height: 5" at peak Width: 18" x 18" outside dimension, 16" x 16" inside dimension Thickness: 2" edge, 5" at peak Box Quantity: 1 piece Installation: NextStone 18" Column Wrap Caps are easily attached with polyurethane adhesive. To cap NextStone 4-piece Column Wrap.  Column Wraps are sold separately. Application: To cap NextStone 30" Country Ledgestone or Slatestone Post Covers Column Wraps. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Buff 10" Post Cover Cap is built to finish the top of your NextStone post covers with a clean, simple look. It has a rough stone texture and a soft buff colour that works well in most settings. Each cap has a 10" x 10" outer dimension and fits nicely over posts with an 8" x 8" top. The edge is 1.5 inches high, rising to 3 inches at the peak. It’s made to match the 47" Country Ledgestone or 41" Slatestone Post Covers. Installation is quick and easy. Just apply polyurethane adhesive and press it into place. One piece per box. Style:  10" Post Cover Cap Colour: Buff Texture: Rough texture Height: 3" at peak Width: 10" x 10" outside dimension, 8" x 8" inside dimension Thickness: 1 1/2" edge, 3" at peak Box Quantity: 1 piece Installation: NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers.  Post Covers are sold separately. Application: To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Gray 10” Post Cover Cap sits on your NextStone post wraps. It has a rough texture and a peaked shape that gives each post a finished look. The colour is easy to match with most styles.  Each cap has an outer size of 10” x 10” and fits neatly over an 8” x 8” post. The edge height is 1.5 inches, rising to 3 inches at the peak. It’s made to fit over the 47” Country Ledgestone or 41” Slatestone Post Covers. There is one cap per box. Attach it with polyurethane adhesive and press it into place. Style:  10" Post Cover Cap Colour: Gray Texture: Rough texture Height: 3" at peak Width: 10" x 10" outside dimension, 8" x 8" inside dimension Thickness: 1 1/2" edge, 3" at peak Box Quantity: 1 piece Installation: NextStone 10" Post Cover Caps are easily attached with polyurethane adhesive. To cap NextStone 2-piece Post Covers.  Post Covers are sold separately. Application: To cap NextStone 47" Country Ledgestone or 41" Slatestone Post Covers. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Slatestone Post Cover Converter Kit is designed to fit 4” x 4” wood posts, allowing NextStone Slatestone Post Covers to be installed securely. The kit extends the post to 6” x 6” using lightweight polyurethane rings. In each box, there are four pieces. One top, one bottom, and two middle supports. The rings screw directly into the post and can be cut in half diagonally if needed. This gives you flexibility for posts where a full ring won’t slide over. This kit is for vertical use only. Post covers and caps are sold separately. Style:  Slatestone Post Cover Converter Kit Colour: Neutral Texture: Smooth Width: Inside dimensions: accommodate a 4" x 4" post Thickness: 1 1/2" Box Quantity: 4 pieces, 1 top, 1 bottom, 2 middle supports Installation: NextStone Post Cover Converter Kit Polyurethane rings are made to extend a TRUE 4" x 4" post to 6" x 6" for NextStone Post Covers. Screwed into the bottom, top and in the middle of the wood post. Converter kits can be but diagonally or in half to accommodate posts that do not allow kits to slide over. Post Covers and Caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Midnight Ash Slatestone 30” Column Wrap is made to fit around boxed columns, giving them a clean, stacked stone finish. Each wrap comes as four interlocking pieces that snap together using a patented groove system. Once it's on, it stays put.  The finished column measures 16 inches by 16 inches on the outside and stands 30 inches tall. Inside dimensions are just under 14 inches. Each piece is 1 ¾ inches thick. It’s not a stand-alone product, so you’ll need a box frame underneath.  The Midnight Ash colour adds contrast and works well with charcoal or neutral tones. Note: This is NOT a stand-alone product. There must be a box to attach to. Style:  Slatestone 30" Column Wrap Colour: Midnight Ash Accessory Colour: Charcoal Texture: Dry stacked stone look Height: 30" Width: Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8" Thickness: 1 3/4" Box Quantity: 4 pieces Coverage: 30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8") Installation: This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Teton Buff Country Ledgestone 30” Column Wrap is designed to give boxed columns a realistic stone finish without the weight or mess of real masonry. Each wrap includes four locking pieces that fit together easily using the built-in groove system. This wrap stands 30 inches tall and measures 16” x 16” on the outside, with an inner opening of just under 14”/. It’s 1½ inches thick and is designed to be attached to a structural box. Column caps are sold separately. The Teton Buff colour has a warm, natural look that pairs well with wood trim, stucco, or siding. An excellent choice for all different exterior styles.  Note: This is NOT a stand-alone product. There must be a box to attach to. Style:  Country Ledgestone 30" Column Wrap Colour: Teton Buff Accessory Colour: Buff Texture: Dry stacked stone look Height: 30" Width: Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8" Thickness: 1 1/2" Box Quantity: 4 pieces Coverage: 30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8") Installation: This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Himalayan Brown Country Ledgestone 30” Column wrap is an easy way to give existing boxed columns a clean, dry-stacked stone look. Each wrap includes four interlocking pieces that slide together using the patented groove system.  It measures 30 inches tall with outside dimensions of 16” x 16” and an inside opening of just under 14”. The wrap is 1½ inches thick and is designed to be fixed to a structural box. Column caps are available separately. The Himalayan Brown finish brings out warm tones that suit brick, wood, or neutral siding.  Note: This is NOT a stand-alone product. There must be a box to attach to. Style:  Country Ledgestone 30" Column Wrap Colour: Himalayan Brown Accessory Colour: Brown Texture: Dry stacked stone look Height: 30" Width: Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8" Thickness: 1 1/2" Box Quantity: 4 pieces Coverage: 30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8") Installation: This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Appalachian Gray Country Ledgestone 30” Column Wrap is the perfect way to update your exterior with a clean, dry-stacked stone. It’s an excellent idea for adding character to porch posts or square columns without any mess of real stone.  Each box includes four interlocking pieces that wrap around your existing structure. The patented groove system keeps everything in place, and the installation is easy. These wraps are designed for vertical surfaces and work best when paired with an 18” cap. The soft gray finish works well with a range of colours and styles.  Note: This is NOT a stand-alone product. There must be a box to attach to. Style:  Country Ledgestone 30" Column Wrap Colour: Appalachian Gray Accessory Colour: Gray Texture: Dry stacked stone look Height: 30" Width: Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8" Thickness: 1 1/2" Box Quantity: 4 pieces Coverage: 30" (Outside dimensions: 16" x 16", Inside dimensions: 13 7/8" x 13 7/8") Installation: This is NOT a stand-alone product. There must be a box to attach to. 18" Column caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Midnight Ash Slatestone 41” Post Cover gives wood posts a solid stone look without all the hard work. It's a simple two-piece design that clicks together around a 4” or 6” post. A converter kit is needed for 4” posts, which is sold separately.  You can use screws or adhesive to fix the pieces in place. The stacked stone fixture texture adds a clean finish that works well with most siding and trim styles. The colour sits at the darker end of the range, giving a bold, modern look. Style:  Slatestone 41" Post Cover Colour: Midnight Ash Accessory Colour: Charcoal Texture: Dry stacked stone look Height: 41" Width: Outside dimensions: 8" x 8", Inside dimensions: 5 1/2" x 5 1/2" Thickness: 1 3/4" Box Quantity: 2 pieces Coverage: 41" high (for 4 or 6 inch wood post)  Installation: To cover a 4 or 6-inch wood post. Instructions are available in each box.  Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Teton Buff Country Ledgestone Post gives any 4” or 6” post a natural stacked stone look in minutes. It stands 47 inches tall with 8” x 8” outer dimensions and comes as a two-piece wrap.  Each box includes both panels. Once fitted together, they snap around the post and hold firmly with glue or screws. If you’re working with a 4” post, you’ll need the converter kit. Post caps are sold separately to match.  These are a great choice for deck posts, basement posts, or anywhere that you want to look like stone. The Teton buff also has a nice light tone that works well with other colours. Style:  Country Ledgestone 47" Post Cover Colour: Teton Buff Accessory Colour: Buff Texture: Dry stacked stone look Height: 47" Width: Outside dimensions: 8" x 8", Inside dimensions: 6" x 6" Thickness: 1 1/2" Box Quantity: 2 pieces Coverage: 47" high (for 4 or 6 inch wood post)  Installation: To cover a 4 or 6-inch wood post. Instructions are available in each box.  Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Product Description: The Himalayan Brown Country Ledgestone 47” Post Cover gives wood posts a clean, stone-look finish. Each stands 47 inches tall and fits over 4 or 6-inch posts with an 8” x 8” outer profile. The box includes two interlocking panels that form a full wrap. The dry-stacked texture adds depth to basements, porches, and deck columns. You can glue or screw the panels together. You don’t need to paint or caulk it; no extra prep is required. The brown tone works well with neutral siding and trim. For use with vertical services only. Style:  Country Ledgestone 47" Post Cover Colour: Himalayan Brown Accessory Colour: Brown Texture: Dry stacked stone look Height: 47" Width: Outside dimensions: 8" x 8", Inside dimensions: 6" x 6" Thickness: 1 1/2" Box Quantity: 2 pieces Coverage: 47" high (for 4 or 6 inch wood post)  Installation: To cover a 4 or 6-inch wood post. Instructions are available in each box.  Converter kit required for installation over 4" post. Sold separately. Post caps are sold separately. Application: Vertical surfaces only. Not suitable for floor applications. Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitor settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.